This section documents API usage specific to this template, so for an introduction we suggest you refer to the generic API documentation instead.

Template data

There are three different formats in which you can supply data to this template. The most convenient for you to use likely depends on the source of your data, as described below.

1. Array of arrays, and a bindings object

You can supply arrays of arrays to opts.data, which might look like:

{
    data: {
        regions: [
            [ "RegionsColumn1Value1", "RegionsColumn2Value1",
            [ "RegionsColumn1Value2", "RegionsColumn2Value2",
            [ "RegionsColumn1Value3", "RegionsColumn2Value3",
            ...
        ],
        regions_minimap: [
            [ "Regions_minimapColumn1Value1", "Regions_minimapColumn2Value1",
            [ "Regions_minimapColumn1Value2", "Regions_minimapColumn2Value2",
            [ "Regions_minimapColumn1Value3", "Regions_minimapColumn2Value3",
            ...
        ]
    }
}

where each array of arrays represents the rows in a data sheet.

To tell the API how the values from each column should be associated with the keys that the template is expecting, you must also supply an object attached to opts.bindings. (The meanings of the keys in the bindings object are documented below.) The minimal bindings you can supply for this template are as shown in this example:

{
    template: "@flourish/3d-region-map",
    version: "2",
    bindings: {
        regions: {
            geojson: 0, // index of a column in your data
        },
        regions_minimap: {
            
        }
    },
    data: {
        regions: [
            [ "RegionsColumn1Value1", "RegionsColumn2Value1",
            [ "RegionsColumn1Value2", "RegionsColumn2Value2",
            [ "RegionsColumn1Value3", "RegionsColumn2Value3",
            ...
        ],
        regions_minimap: [
            [ "Regions_minimapColumn1Value1", "Regions_minimapColumn2Value1",
            [ "Regions_minimapColumn1Value2", "Regions_minimapColumn2Value2",
            [ "Regions_minimapColumn1Value3", "Regions_minimapColumn2Value3",
            ...
        ]
    }
}

All possible bindings that you can supply are shown in this example:

{
    template: "@flourish/3d-region-map",
    version: "2",
    bindings: {
        regions: {
            geojson: 0, // index of a column in your data
            color: 1, // index of a column in your data
            elevation: 2, // index of a column in your data
            metadata: [3, 4, ...], // index(es) of column(s) in your data
        },
        regions_minimap: {
            geojson: 0, // index of a column in your data
        }
    },
    data: {
        regions: [
            [ "RegionsColumn1Value1", "RegionsColumn2Value1",
            [ "RegionsColumn1Value2", "RegionsColumn2Value2",
            [ "RegionsColumn1Value3", "RegionsColumn2Value3",
            ...
        ],
        regions_minimap: [
            [ "Regions_minimapColumn1Value1", "Regions_minimapColumn2Value1",
            [ "Regions_minimapColumn1Value2", "Regions_minimapColumn2Value2",
            [ "Regions_minimapColumn1Value3", "Regions_minimapColumn2Value3",
            ...
        ]
    }
}

2. Array of objects with arbitrary keys, and a bindings object

This format is most likely useful when you have data from an external source, such as CSV data loaded from d3-dsv. You should supply this attached to the opts.data, which might look like:

{
        regions: [
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            ...
        ],
        regions_minimap: [
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            ...
        ]
    }

... but with the keys being the column headers from your source data instead. You must also supply an object attached to opts.bindings. The minimal bindings you can supply for this template are as shown in this example:

{
    template: "@flourish/3d-region-map",
    version: "2",
    bindings: {
        regions: {
            geojson: "RegionsHeader1",
        },
        regions_minimap: {
            
        }
    },
    data: {
        regions: [
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            ...
        ],
        regions_minimap: [
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            ...
        ]
    }
}

All possible bindings that you can supply are shown in this example:

{
    template: "@flourish/3d-region-map",
    version: "2",
    bindings: {
        regions: {
            geojson: "RegionsHeader1",
            color: "RegionsHeader2",
            elevation: "RegionsHeader3",
            metadata: ["RegionsHeader4", "RegionsHeader5", ...],
        },
        regions_minimap: {
            geojson: "Regions_minimapHeader1",
        }
    },
    data: {
        regions: [
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            { "RegionsHeader1": ..., "RegionsHeader2": ..., ... },
            ...
        ],
        regions_minimap: [
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            { "Regions_minimapHeader1": ..., "Regions_minimapHeader2": ..., ... },
            ...
        ]
    }
}

(As before, the keys containing "Header" would be replaced by column names from your data source.)

3. Array of objects with template-defined keys

There is an alternative format you can use, which is likely to be easier to use if your data is not from a spreadsheet source. With this alternative format you supply your data to the template as an array of objects, attached to opts.data, where the keys must be those used by the template, as documented below. In this case there is no need to supply a bindings object, since the key names are already those expected by the template. The required properties in the data object are as follows (scroll down for a description of what each property is):

{
    template: "@flourish/3d-region-map",
    version: "2",
    data: {
    regions: [
        {
            geojson: ...,
            metadata: [...]
        },
        ...
    ]
},
    ...
}

And the full list of all possible properties is as follows:

{
    template: "@flourish/3d-region-map",
    version: "2",
    data: {
    regions: [
        {
            geojson: ...,
            color: ...,
            elevation: ...,
            metadata: [...]
        },
        ...
    ],
    regions_minimap: [
        {
            geojson: ...
        },
        ...
    ]
},
    ...
}

Meanings of the template data keys:

• regions.geojson: geojson
• regions.color: Optionally, a column containing the values used to determine the fill colour of each shape. If these are categories, you should set the fill's scale type to "Categorical" in the visualisation settings. If these are numerical values, you should set the scale type to either "Sequential" or "Diverging"
• regions.elevation: Optionally, a column containing the elevation values for each shape.
• regions.metadata: metadata
• regions_minimap.geojson: geojson

Template settings

Options for opts.state.

Regions

geojson.geojson_elevation_enabled boolean

Extrude shapes.

geojson.geojson_elevation_normalize string

Normalize elevation.

geojson.geojson_elevation_scale number

Elevation scale.

geojson.geojson_stroke_enabled boolean

Enable stroke.

geojson.geojson_stroke_color color

Stroke color.

geojson.geojson_fill_enabled boolean

Enable fill.

geojson.geojson_color.scale_type string

Scale type.

geojson.geojson_color.categorical_type string

geojson.geojson_color.categorical_palette colors

Palette.

geojson.geojson_color.categorical_extend boolean

Auto-extend. Automatically generate additional colours when needed to avoid the palette colours being used more than once.

geojson.geojson_color.categorical_seed_color color

Seed color. Initial color in generated sequence (avoid shades of grey).

geojson.geojson_color.categorical_rotation_angle number

Hue rotation angle. Angle, in degrees, between one generated colour and the next. The default value, ~360/(Golden ratio), ensures adjacent hues are not too similar.

geojson.geojson_color.categorical_color_space string

geojson.geojson_color.categorical_custom_palette text

Custom overrides. Type the name of the entity whose colour you want to set, a colon and then a colour (using a name, hex-code or rgb declaration). Multiple colours can be set using multiple lines. For example:

---

Party 1: red
Party 2: #4455AA
Party 3: rgb(30,168,26)

geojson.geojson_color.sequential_palette string

Palette.

geojson.geojson_color.sequential_custom_min color

Minimum color.

geojson.geojson_color.sequential_custom_max color

Maximum color.

geojson.geojson_color.sequential_color_space string

geojson.geojson_color.sequential_reverse boolean

Reverse scale.

geojson.geojson_color.diverging_palette string

Palette.

geojson.geojson_color.diverging_custom_min color

Minimum color.

geojson.geojson_color.diverging_custom_mid color

Midpoint color.

geojson.geojson_color.diverging_custom_max color

Maximum color.

geojson.geojson_color.diverging_color_space string

geojson.geojson_color.diverging_reverse boolean

Reverse scale.

geojson.geojson_fill_color color

Fallback colour. Fill colour to use if a colour value is missing or invalid for a shape.

geojson.geojson_opacity number

Shape opacity.

Base map

map.style_enabled boolean

map.style_base string

Map style.

map.style_monochrome_color color

Map base color.

map.style_show_borders boolean

Display borders.

map.style_show_roads boolean

Display transport.

map.style_show_labels boolean

Display labels.

map.style_show_landuse boolean

Display land use.

map.style_show_water boolean

Display water.

map.map_language_auto boolean

Detect language. Automatically changes the language used on the base map to match the viewer's language settings.

map.map_language_alts boolean

Display alternatives. Whether or not to display latin alternatives for non-latin languages (or vice versa)

map.map_language string

Language.

map.map_zoom_min number

Min zoom.

map.map_zoom_max number

Max zoom.

map.map_bound_position boolean

Limit viewport bounds.

map.map_lat_min number

Min latitude.

map.map_lat_max number

Max latitude.

map.map_lng_min number

Min longitude.

map.map_lng_max number

Max longitude.

map.map_initial_type string

Initial viewport. By default, the initial viewport of the map is automatically set to include every visible object. The "centroid" option allows you to select a custom latitude, longitude and zoom. The "bounds" option lets you specify a custom bounding box for the viewport to enclose.

map.map_initial_pitch number

Pitch.

map.map_initial_bearing number

Bearing.

map.map_initial_lat number

Latitude.

map.map_initial_lng number

Longitude.

map.map_initial_zoom number

Zoom.

map.map_initial_bounds_lat_min number

Min latitude.

map.map_initial_bounds_lng_min number

Min longitude.

map.map_initial_bounds_lat_max number

Max latitude.

map.map_initial_bounds_lng_max number

Max longitude.

map.map_interactive boolean

Allow user interaction.

map.map_hijack_scroll boolean

Require cmd/ctrl to zoom when scrolling.

map.controls_geolocator_enabled boolean

Use geolocator control.

map.controls_geolocator_alignment string

Geolocator control position.

map.controls_fullscreen_enabled boolean

Use fullscreen control.

map.controls_fullscreen_alignment string

Fullscreen control position.

map.animation_enabled boolean

Enable animation.

map.animation_duration number

Duration.

Inset map

minimap.minimap_display boolean

Display map.

minimap.minimap_rotate boolean

Rotate with camera.

minimap.minimap_custom_colors boolean

Customise colours.

minimap.minimap_fill color

Region fill color.

minimap.minimap_ocean_color color

Ocean color.

minimap.minimap_stroke color

Region stroke color.

minimap.minimap_outline color

Outline color.

minimap.minimap_show_bounds boolean

Display viewport bounds.

minimap.minimap_bounds_color color

Region bounds color.

minimap.minimap_bounds_opacity number

Region bounds opacity.

minimap.minimap_size_type string

Size units.

minimap.minimap_size_desktop_pixels number

Pixels (desktop).

minimap.minimap_size_mobile_pixels number

Pixels (mobile).

minimap.minimap_size_desktop_viewport number

Screen % (desktop).

minimap.minimap_size_mobile_viewport number

Screen % (mobile).

Popups

popup.show_popups boolean

Popups.

popup.is_custom boolean

Popup contents.

popup.custom_template text

Popup content. The text to appear in the popup. You can use {{column_name}} to add a value from your data. It must be in a selected column, but you can add columns to “Metadata” if you just want to include them for use in the popup. Advanced users can include HTML to apply layouts, formatting, images, etc.

popup.show_pointer boolean

Pointer.

popup.show_shadow boolean

Shadow.

popup.style_popups boolean

Custom styling.

popup.text_color color

Text colour.

popup.align string

Alignment.

popup.font_size number

Font size.

popup.fill_color color

Fill colour.

popup.opacity number

Fill opacity.

popup.padding number

Padding.

popup.border_radius number

Radius. Corner radius of popup

Number localization

localization.input_decimal_separator string

Decimal separator in data sheet. Used for interpreting your data. Only change if data is not displaying on the chart as expected.

localization.output_separators string

Number format to display. How the numbers should appear on chart labels

format_popup.prefix string

Prefix. Text to place in front of number

format_popup.suffix string

Suffix. Text to place after number

format_popup.n_dec number

Decimal places. Use negative integers to round to positive powers of ten (eg -2 rounds to the nearest 100)

format_popup.strip_zeros boolean

Remove trailing zeros.

format_popup.strip_separator boolean

Hide thousands separator below 10,000. Turn off if you want four-digit numbers to include a separator, e.g. “1,234” rather than “1234”.

format_popup.transform_labels boolean

Multiply/divide values.

format_popup.transform string

format_popup.multiply_divide_constant number

format_popup.exponentiate_constant number

Layout

layout.body_font font

Font.

layout.max_width number

Maximum width. Leave blank to stretch to container width

layout.background_color color

Background.

layout.margin number

Margin.

layout.layout_order string

Layout order.

layout.space_between_sections string

Space between sections.

layout.space_between_sections_custom number

Custom.

Header

layout.header_align string

Alignment.

layout.title string

layout.title_styling boolean

Change title styles.

layout.title_size string

Size.

layout.title_size_custom number

Custom. Specify a custom responsive font size. Best results will be with values between 1.2 and 3

layout.title_weight string

Weight.

layout.title_color color

Color.

layout.title_line_height number

Line height.

layout.subtitle string

layout.subtitle_styling boolean

Change subtitle styles.

layout.subtitle_size string

Size.

layout.subtitle_size_custom number

Custom. Specify a custom responsive font size. Best results will be with values between 1.2 and 3

layout.subtitle_weight string

Weight.

layout.subtitle_color color

Color.

layout.subtitle_line_height number

Line height.

layout.subtitle_space_above string

Space above.

layout.subtitle_space_above_custom number

Custom.

layout.text string

layout.text_styling boolean

Change text styles.

layout.text_size string

Size.

layout.text_size_custom number

Custom. Specify a custom responsive font size. Best results will be with values between 1.2 and 3

layout.text_weight string

Weight.

layout.text_color color

Color.

layout.text_line_height number

Line height.

layout.text_space_above string

Space above.

layout.text_space_above_custom number

Custom.

Footer

layout.source_name string

Source name.

layout.source_url string

Source url.

layout.multiple_sources boolean

Multiple sources.

layout.source_name_2 string

Source name.

layout.source_url_2 string

Source url.

layout.source_name_3 string

Source name.

layout.source_url_3 string

Source url.

layout.source_label string

Source label.

layout.note string

Note.

layout.size number

Size.

layout.color color

Color.

layout.footer_align string

Alignment.

layout.logo_url url

Image.

layout.logo_link_url string

Link.

layout.logo_height number

Height.

layout.logo_margin number

Margin.

layout.logo_order string

Position.

layout.footer_align_vertical string

V. align.