This section documents API usage specific to this template, so for an introduction we suggest you refer to the generic API documentation instead.

Template data

There are three different formats in which you can supply data to this template. The most convenient for you to use likely depends on the source of your data, as described below.

1. Array of arrays, and a bindings object

You can supply arrays of arrays to opts.data, which might look like:

{
    data: {
        questions: [
            [ "QuestionsColumn1Value1", "QuestionsColumn2Value1",
            [ "QuestionsColumn1Value2", "QuestionsColumn2Value2",
            [ "QuestionsColumn1Value3", "QuestionsColumn2Value3",
            ...
        ],
        order: [
            [ "OrderColumn1Value1", "OrderColumn2Value1",
            [ "OrderColumn1Value2", "OrderColumn2Value2",
            [ "OrderColumn1Value3", "OrderColumn2Value3",
            ...
        ],
        labels: [
            [ "LabelsColumn1Value1", "LabelsColumn2Value1",
            [ "LabelsColumn1Value2", "LabelsColumn2Value2",
            [ "LabelsColumn1Value3", "LabelsColumn2Value3",
            ...
        ],
        colors: [
            [ "ColorsColumn1Value1", "ColorsColumn2Value1",
            [ "ColorsColumn1Value2", "ColorsColumn2Value2",
            [ "ColorsColumn1Value3", "ColorsColumn2Value3",
            ...
        ],
        places: [
            [ "PlacesColumn1Value1", "PlacesColumn2Value1",
            [ "PlacesColumn1Value2", "PlacesColumn2Value2",
            [ "PlacesColumn1Value3", "PlacesColumn2Value3",
            ...
        ],
        answer_groups: [
            [ "Answer_groupsColumn1Value1", "Answer_groupsColumn2Value1",
            [ "Answer_groupsColumn1Value2", "Answer_groupsColumn2Value2",
            [ "Answer_groupsColumn1Value3", "Answer_groupsColumn2Value3",
            ...
        ]
    }
}

where each array of arrays represents the rows in a data sheet.

To tell the API how the values from each column should be associated with the keys that the template is expecting, you must also supply an object attached to opts.bindings. (The meanings of the keys in the bindings object are documented below.) The minimal bindings you can supply for this template are as shown in this example:

{
    template: "@flourish/survey",
    version: "14",
    bindings: {
        questions: {
            
        },
        order: {
            
        },
        labels: {
            label: 0, // index of a column in your data
            replacement: 1, // index of a column in your data
        },
        colors: {
            question: 0, // index of a column in your data
            answer: 1, // index of a column in your data
            color: 2, // index of a column in your data
        },
        places: {
            latitude: 0, // index of a column in your data
            longitude: 1, // index of a column in your data
        },
        answer_groups: {
            group: 0, // index of a column in your data
            question: 1, // index of a column in your data
            display_as: 2, // index of a column in your data
        }
    },
    data: {
        questions: [
            [ "QuestionsColumn1Value1", "QuestionsColumn2Value1",
            [ "QuestionsColumn1Value2", "QuestionsColumn2Value2",
            [ "QuestionsColumn1Value3", "QuestionsColumn2Value3",
            ...
        ],
        order: [
            [ "OrderColumn1Value1", "OrderColumn2Value1",
            [ "OrderColumn1Value2", "OrderColumn2Value2",
            [ "OrderColumn1Value3", "OrderColumn2Value3",
            ...
        ],
        labels: [
            [ "LabelsColumn1Value1", "LabelsColumn2Value1",
            [ "LabelsColumn1Value2", "LabelsColumn2Value2",
            [ "LabelsColumn1Value3", "LabelsColumn2Value3",
            ...
        ],
        colors: [
            [ "ColorsColumn1Value1", "ColorsColumn2Value1",
            [ "ColorsColumn1Value2", "ColorsColumn2Value2",
            [ "ColorsColumn1Value3", "ColorsColumn2Value3",
            ...
        ],
        places: [
            [ "PlacesColumn1Value1", "PlacesColumn2Value1",
            [ "PlacesColumn1Value2", "PlacesColumn2Value2",
            [ "PlacesColumn1Value3", "PlacesColumn2Value3",
            ...
        ],
        answer_groups: [
            [ "Answer_groupsColumn1Value1", "Answer_groupsColumn2Value1",
            [ "Answer_groupsColumn1Value2", "Answer_groupsColumn2Value2",
            [ "Answer_groupsColumn1Value3", "Answer_groupsColumn2Value3",
            ...
        ]
    }
}

All possible bindings that you can supply are shown in this example:

{
    template: "@flourish/survey",
    version: "14",
    bindings: {
        questions: {
            categorical: [0, 1, ...], // index(es) of column(s) in your data
            continuous: [2, 3, ...], // index(es) of column(s) in your data
            geo: [4, 5, ...], // index(es) of column(s) in your data
            label: 6, // index of a column in your data
            column_filter: 7, // index of a column in your data
            id: 8, // index of a column in your data
            metadata: [9, 10, ...], // index(es) of column(s) in your data
        },
        order: {
            categories: [0, 1, ...], // index(es) of column(s) in your data
        },
        labels: {
            label: 0, // index of a column in your data
            replacement: 1, // index of a column in your data
        },
        colors: {
            question: 0, // index of a column in your data
            answer: 1, // index of a column in your data
            color: 2, // index of a column in your data
        },
        places: {
            latitude: 0, // index of a column in your data
            longitude: 1, // index of a column in your data
            names: [2, 3, ...], // index(es) of column(s) in your data
        },
        answer_groups: {
            group: 0, // index of a column in your data
            question: 1, // index of a column in your data
            display_as: 2, // index of a column in your data
            affirmative_answers: [3, 4, ...], // index(es) of column(s) in your data
        }
    },
    data: {
        questions: [
            [ "QuestionsColumn1Value1", "QuestionsColumn2Value1",
            [ "QuestionsColumn1Value2", "QuestionsColumn2Value2",
            [ "QuestionsColumn1Value3", "QuestionsColumn2Value3",
            ...
        ],
        order: [
            [ "OrderColumn1Value1", "OrderColumn2Value1",
            [ "OrderColumn1Value2", "OrderColumn2Value2",
            [ "OrderColumn1Value3", "OrderColumn2Value3",
            ...
        ],
        labels: [
            [ "LabelsColumn1Value1", "LabelsColumn2Value1",
            [ "LabelsColumn1Value2", "LabelsColumn2Value2",
            [ "LabelsColumn1Value3", "LabelsColumn2Value3",
            ...
        ],
        colors: [
            [ "ColorsColumn1Value1", "ColorsColumn2Value1",
            [ "ColorsColumn1Value2", "ColorsColumn2Value2",
            [ "ColorsColumn1Value3", "ColorsColumn2Value3",
            ...
        ],
        places: [
            [ "PlacesColumn1Value1", "PlacesColumn2Value1",
            [ "PlacesColumn1Value2", "PlacesColumn2Value2",
            [ "PlacesColumn1Value3", "PlacesColumn2Value3",
            ...
        ],
        answer_groups: [
            [ "Answer_groupsColumn1Value1", "Answer_groupsColumn2Value1",
            [ "Answer_groupsColumn1Value2", "Answer_groupsColumn2Value2",
            [ "Answer_groupsColumn1Value3", "Answer_groupsColumn2Value3",
            ...
        ]
    }
}

2. Array of objects with arbitrary keys, and a bindings object

This format is most likely useful when you have data from an external source, such as CSV data loaded from d3-dsv. You should supply this attached to the opts.data, which might look like:

{
        questions: [
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            ...
        ],
        order: [
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            ...
        ],
        labels: [
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            ...
        ],
        colors: [
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            ...
        ],
        places: [
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            ...
        ],
        answer_groups: [
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            ...
        ]
    }

... but with the keys being the column headers from your source data instead. You must also supply an object attached to opts.bindings. The minimal bindings you can supply for this template are as shown in this example:

{
    template: "@flourish/survey",
    version: "14",
    bindings: {
        questions: {
            
        },
        order: {
            
        },
        labels: {
            label: "LabelsHeader1",
            replacement: "LabelsHeader2",
        },
        colors: {
            question: "ColorsHeader1",
            answer: "ColorsHeader2",
            color: "ColorsHeader3",
        },
        places: {
            latitude: "PlacesHeader1",
            longitude: "PlacesHeader2",
        },
        answer_groups: {
            group: "Answer_groupsHeader1",
            question: "Answer_groupsHeader2",
            display_as: "Answer_groupsHeader3",
        }
    },
    data: {
        questions: [
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            ...
        ],
        order: [
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            ...
        ],
        labels: [
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            ...
        ],
        colors: [
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            ...
        ],
        places: [
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            ...
        ],
        answer_groups: [
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            ...
        ]
    }
}

All possible bindings that you can supply are shown in this example:

{
    template: "@flourish/survey",
    version: "14",
    bindings: {
        questions: {
            categorical: ["QuestionsHeader1", "QuestionsHeader2", ...],
            continuous: ["QuestionsHeader3", "QuestionsHeader4", ...],
            geo: ["QuestionsHeader5", "QuestionsHeader6", ...],
            label: "QuestionsHeader7",
            column_filter: "QuestionsHeader8",
            id: "QuestionsHeader9",
            metadata: ["QuestionsHeader10", "QuestionsHeader11", ...],
        },
        order: {
            categories: ["OrderHeader1", "OrderHeader2", ...],
        },
        labels: {
            label: "LabelsHeader1",
            replacement: "LabelsHeader2",
        },
        colors: {
            question: "ColorsHeader1",
            answer: "ColorsHeader2",
            color: "ColorsHeader3",
        },
        places: {
            latitude: "PlacesHeader1",
            longitude: "PlacesHeader2",
            names: ["PlacesHeader3", "PlacesHeader4", ...],
        },
        answer_groups: {
            group: "Answer_groupsHeader1",
            question: "Answer_groupsHeader2",
            display_as: "Answer_groupsHeader3",
            affirmative_answers: ["Answer_groupsHeader4", "Answer_groupsHeader5", ...],
        }
    },
    data: {
        questions: [
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            { "QuestionsHeader1": ..., "QuestionsHeader2": ..., ... },
            ...
        ],
        order: [
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            { "OrderHeader1": ..., "OrderHeader2": ..., ... },
            ...
        ],
        labels: [
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            { "LabelsHeader1": ..., "LabelsHeader2": ..., ... },
            ...
        ],
        colors: [
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            { "ColorsHeader1": ..., "ColorsHeader2": ..., ... },
            ...
        ],
        places: [
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            { "PlacesHeader1": ..., "PlacesHeader2": ..., ... },
            ...
        ],
        answer_groups: [
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            { "Answer_groupsHeader1": ..., "Answer_groupsHeader2": ..., ... },
            ...
        ]
    }
}

(As before, the keys containing "Header" would be replaced by column names from your data source.)

3. Array of objects with template-defined keys

There is an alternative format you can use, which is likely to be easier to use if your data is not from a spreadsheet source. With this alternative format you supply your data to the template as an array of objects, attached to opts.data, where the keys must be those used by the template, as documented below. In this case there is no need to supply a bindings object, since the key names are already those expected by the template. The required properties in the data object are as follows (scroll down for a description of what each property is):

{
    template: "@flourish/survey",
    version: "14",
    data: {
    questions: [
        {
            categorical: [...],
            continuous: [...],
            geo: [...],
            metadata: [...]
        },
        ...
    ],
    order: [
        {
            categories: [...]
        },
        ...
    ],
    labels: [
        {
            label: ...,
            replacement: ...
        },
        ...
    ],
    colors: [
        {
            question: ...,
            answer: ...,
            color: ...
        },
        ...
    ],
    places: [
        {
            latitude: ...,
            longitude: ...,
            names: [...]
        },
        ...
    ],
    answer_groups: [
        {
            group: ...,
            question: ...,
            display_as: ...,
            affirmative_answers: [...]
        },
        ...
    ]
},
    ...
}

And the full list of all possible properties is as follows:

{
    template: "@flourish/survey",
    version: "14",
    data: {
    questions: [
        {
            categorical: [...],
            continuous: [...],
            geo: [...],
            label: ...,
            column_filter: ...,
            id: ...,
            metadata: [...]
        },
        ...
    ],
    order: [
        {
            categories: [...]
        },
        ...
    ],
    labels: [
        {
            label: ...,
            replacement: ...
        },
        ...
    ],
    colors: [
        {
            question: ...,
            answer: ...,
            color: ...
        },
        ...
    ],
    places: [
        {
            latitude: ...,
            longitude: ...,
            names: [...]
        },
        ...
    ],
    answer_groups: [
        {
            group: ...,
            question: ...,
            display_as: ...,
            affirmative_answers: [...]
        },
        ...
    ]
},
    ...
}

Meanings of the template data keys:

• questions.categorical: Each of these columns appears in the <b>Group by</b>, <b>Shade by</b> and <b>Compare</b> dropdowns.
• questions.continuous: Must contain numbers. Each of these columns appears in the <b>Size by</b> dropdown.
• questions.geo: Must contain place names matching those specified in the <b>Places</b> sheet. Set to blank to disable the map mode.
• questions.label: A column containing text (e.g. names or emoji) to write on the dots. Not recommended for datasets with more than a few hundred dots.
• questions.column_filter: Add a time slider or menu to <a href="https://help.flourish.studio/article/573-how-row-and-column-filters-work">filter</a> the data based on the contents of a single column
• questions.id: Specify to allow animations between multiple occurrences of the same person or thing – e.g. when using a time slider
• questions.metadata: One or more columns of information (text, <a href="https://help.flourish.studio/article/46-how-to-add-images-to-your-visualization>image URLs</a>, <a href="https://help.flourish.studio/article/259-how-to-embed-charts-in-your-popups-or-panels">embedded charts</a> etc) to include in <a href="https://help.flourish.studio/article/69-how-to-add-custom-content-to-your-popups">popups and panels</a>.
• order.categories: Use one column for each question or metric. Put the column header from the main data sheet at the top (e.g. "Do you agree?"), followed by the answers in the order you want (e.g. "disagree", "neutral", "agree")
• labels.label: A column containing phrases from the main data sheet
• labels.replacement: A column containing the phrase to display
• colors.question: The column header (e.g. a survey question) exactly as it appears in the main data sheet
• colors.answer: Use one column for each question or metric. Put the column header from the main datasheet at the top (e.g. "Do you agree?"), followed by the answers in <a href="https://help.flourish.studio/article/127-how-to-change-the-ordering-of-your-groups-in-the-survey-template">the order</a> you want (e.g. "disagree", "neutral", "agree")
• colors.color: A color name (e.g. orange, red) or code (e.g. #ff3300, #ff0000)
• places.latitude: A column of latitude values
• places.longitude: A column of longitude values
• places.names: One or more columns of place names matching those in the main data sheet
• answer_groups.group: This column will contain the name of the <a href="https://help.flourish.studio/article/135-how-to-create-a-grouped-question-in-the-survey-template">grouped question</a>
• answer_groups.question: A question that matches exactly one of the questions in the datasheet
• answer_groups.display_as: This will be the new text for the question
• answer_groups.affirmative_answers: The respondent is included in the group if their answer to the question is one of the answers listed in these columns

Template settings

Options for opts.state.

Dots

dot_fill color

Default color. If left blank, the first color in the color palette will be used

dot_opacity number

Opacity.

dot_opacity_unhighlighted number

Opacity (unhighlighted). The opacity of the unhighlighted dots when one of the dots is highlighted

color.categorical_palette colors

Color when shading. The colors to use when shading by the answer to a questions

color.categorical_extend boolean

Extend. Automatically generate additional colours when needed to avoid the palette colours being used more than once

color.categorical_custom_palette text

Custom overrides. Enter the name of the category that you wish to set the color, followed by a colon and the desired color value.

Colors can be set using Hex, RGB, color names or RGBA, if you want to set the opacity. Multiple colors can be set using multiple lines. For example:

---

Party 1: red
Party 2: #4455AA
Party 3: rgb(30,168,26)

---

Note that overrides from the "Color overrides" sheet take priority over the overrides in this setting.

color.numeric_type string

Scale type.

color.binning boolean

In linear mode, the color scale will run as a smooth gradient between 2 colors. In binned mode, the gradient will be divided in smaller blocks.

color.bin_mode string

Binning mode.

color.bin_count number

Number of bins.

color.bin_thresholds string

Custom thresholds. Enter your desired thresholds, separating them with a ";". For instance, "5;10;15".

Bins form as follows:

• From the data's minimum value (domain minimum) up to the first threshold.
• Between consecutive thresholds.
• From the last threshold to the data's maximum value (domain maximum).

For "5;10;15", you'll get four bins based on your data's range.


color.sequential_palette string

Palette.


Allowed values:

• Oranges (Oranges)
• Reds (Reds)
• Blues (Blues)
• Greens (Greens)
• Greys (Greys)
• Purples (Purples)
• Viridis (Viridis)
• Inferno (Inferno)
• Magma (Magma)
• Plasma (Plasma)
• Warm (Warm)
• Cool (Cool)
• CubehelixDefault (Cubehelix)
• BuGn (Blue/Green)
• BuPu (Blue/Purple)
• GnBu (Green/Blue)
• OrRd (Orange/Red)
• PuBuGn (Purple/Blue/Green)
• PuBu (Purple/Blue)
• PuRd (Purple/Red)
• RdPu (Red/Purple)
• YlGnBu (Yellow/Blue/Green)
• YlGn (Yellow/Green)
• YlOrBr (Yellow/Orange/Brown)
• YlOrRd (Yellow/Orange/Red)
• Carrots
• Custom

color.sequential_reverse boolean

Reverse.


color.sequential_custom_min color

Minimum color.


color.sequential_custom_max color

Maximum color.


color.sequential_color_space string

Color space.


Allowed values:

• rgb (RGB)
• lab (LAB)
• hcl (HCL)
• hsl (HSL)

color.sequential_custom_domain boolean

Domain.


Allowed values:

• false (Auto)
• true (Custom)

color.sequential_domain_min number

Min.


color.sequential_domain_max number

Max.


color.diverging_palette string

Palette.


Allowed values:

• RdBu (Red/Blue)
• RdYlGn (Red/Yellow/Green)
• PiYG (Pink/Yellow/Green)
• BrBG (Brown/Blue/Green)
• PRGn (Purple/Red/Green)
• PuOr (Purple/Orange)
• RdGy (Red/Grey)
• RdYlBu (Red/Yellow/Blue)
• Spectral (Spectral)
• Custom

color.diverging_reverse boolean

Reverse.


color.diverging_custom_min color

Minimum color.


color.diverging_custom_mid color

Midpoint color.


color.diverging_custom_max color

Maximum color.


color.diverging_color_space string

Color space.


Allowed values:

• rgb (RGB)
• lab (LAB)
• hcl (HCL)
• hsl (HSL)

color.diverging_custom_domain boolean

Domain.


Allowed values:

• false (Auto)
• true (Custom)

color.diverging_domain_min number

Min.


color.diverging_domain_mid number

Mid.


color.diverging_domain_max number

Max.


dot_shape string

Shape.


Allowed values:

• circle (Circle)
• square (Square)
• polygon (Polygon)

dot_sides number

Sides.


Min: 3

Max: 16

outline_width number

Stroke width. In pixels. The width of the outline stroke.


Max: 5

outline_color color

Stroke color. Outline color for your dots/squares/polygons. If not set, the layout background color will be used.


Dot labels

dot_label string

Default label or emoji. A label or emoji to show on each dot. Overriden by any label specified using the Label column setting.


dot_label_color color

Color.


dot_label_bold boolean

Bold.


dot_label_min number

Min size to display. The minimum text size in pixels for dot labels. Below this level they will not render.


dot_label_auto_size boolean

Sizing mode.


Allowed values:

• true (Auto)
• false (Fixed)

dot_label_fixed number

Size in %. Specifies font size across the graphic as a percentage of dot height


dot_label_scale number

Scale. Scales the labels up or down from their default size


dot_label_size_value boolean

Show numerical value when sizing dots.


Groups

all_group_label string

Name for "all" group.


include_grouped_questions_on_shade_menu boolean

Include grouped questions on shading menu.


include_grouped_questions_on_compare_menu boolean

Include grouped questions on compare menu.


order_groups_by_size boolean

Order groups by size.


order_groups_by_size_mode string

Allowed values:

• ascending (Smallest to largest)
• descending (Largest to smallest)

group_colors boolean

Arrange groups by color. If selected, dots of the same color are grouped together; if not the dots are placed in spreadsheet order


exclusions string

Exclude groups with the following names. Case-sensitive comma-separated list


exclude_blanks boolean

Exclude groups with blank names.


bundle_small_groups boolean

Bundle small groups.


small_groups_threshold number

Min size.


small_groups_other_label string

"Other" group label.


Group labels

label_mode string

Label position.


Allowed values:

• atop (Centre)
• around (Around)
• above (Above)

label_tight_fit boolean

Position close to group.


label_color color

Text color.


label_min_font_size number

Min font size. In pixels; the actual font size in any view is set automatically between the min and max


label_max_font_size number

Max font size. In pixels; the actual font size in any view is set automatically between the min and max


label_group_padding_lines number

Space for labels. The amount of space to leave above the groups, specified in lines of text


label_shadow_size number

Size. As percent of font size


Max: 100

label_shadow_color color

Color.


label_group_count boolean

Show number of dots in group. Adds the number in brackets after the main label; ignored in chart, map and compare modes


label_group_percent boolean

Show group size as % of visible dots. Adds group size as a percent of visible dots, in brackets after the main label.

This setting is ignored in chart, map and compare modes and when showing a grouped question.


label_group_percent_decimals number

Decimal places on percentage labels.


always_show_x_label boolean

Show X label when not comparing. Show the groups label at the bottom of chart when not comparing two metrics


show_xy_axis_labels_when_comparing boolean

Show X/Y labels when comparing. Show groups labels on both axes when comparing two metrics


compare_y_axis_width number

Y axis width.


compare_x_axis_height number

X axis height.


Height mode

chart_height_mode string

Height mode. How the graphic height will be set when embedded with the responsive script embed without a specified height


Allowed values:

• auto (Auto)
• aspect_ratio (Aspect ratio)

chart_aspect_ratio_wide number

Desktop. The chart aspect ratio on screens 640 pixels wide and higher (1 for square - a smaller value means a bigger height)


Min: 0.1

Max: 10

chart_aspect_ratio_narrow number

Mobile. The chart aspect ratio on screens narrower than 640 pixels (1 for square - a smaller value means a bigger height)


Min: 0.1

Max: 10

Map

map_opacity_map_mode number

Map opacity (in map mode).


Max: 1

map_opacity_non_map_mode number

Map opacity (in other modes).


Max: 1

map_max_group_size number

Max group size in map view. In relative units


Min: 0.1

map_dimensions string

Map dimensions.


Allowed values:

• auto (Auto)
• aspect_ratio (Aspect ratio)

map_aspect_ratio number

Map aspect ratio. Aspect ratio of the map. 1 will make the map square.


Min: 0.1

map_region string

Region.


Allowed values:

• world (World)
• usa (USA)
• europe (Europe)
• custom (Custom)

map_region_url url

Url to equirectangular projection of map.


map_region_bounds.x1 number

Minimum longitude.


Min: -180

Max: 180

map_region_bounds.x2 number

Maximum longitude.


Min: -180

Max: 180

map_region_bounds.y2 number

Minimum latitude.


Min: -90

Max: 90

map_region_bounds.y1 number

Maximum latitude.


Min: -90

Max: 90

Popups & panels

popup.mode string

Allowed values:

• none (None)
• popup (Popup)
• panel (Panel)
• both (Both)

popup.popup_is_custom boolean

Popup content.


Allowed values:

• false (Auto)
• true (Custom)

popup.show_popup_styles boolean

Show popup styles.


popup.popup_custom_header html

Popup custom header. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for popup use.

Advanced users can add HTML styling or add category colors to popup headers.

To hide parts of the popup when a column is empty using

{{#if column_name}}Content for non-empty column_name{{/if}}.

For example:

{{#if Capital name}}Capital:{{/if}} {{Capital name}}.

Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.


popup.popup_custom_main html

Popup custom main content. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for popup use.

Advanced users can add HTML for designs, styles, and images.

To hide parts of the popup when a column is empty use the syntax

{{#if column_name}}Content for non-empty column_name{{/if}}.

For example:

{{#if Capital name}}Capital:{{/if}} {{Capital name}}.

Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.


popup.popup_custom_accessible text

Popup custom accessible content. A text alternative to visual custom popup content that will be read out by screenreaders. This content is added as an aria-label attribute to data point elements. You can still use {{column_name}} to add values from your data, but do not use HTML. For example: {Name}}, Population: {{Population}}, GDP: {{GDP}} If left empty, accessible content will fallback to the default popup content.


popup.popup_width number

Max width. In rems, multiples of base font size. Leave blank to let the width adjust based on the contents.


popup.popup_font_size number

Text size.


popup.popup_text_color color

Text color.


popup.popup_align string

Align.


Allowed values:

• start (fa-align-left)
• center (fa-align-center)
• end (fa-align-right)

popup.popup_background color

Fill color.


popup.popup_background_opacity number

Fill opacity.


Max: 1

popup.popup_padding number

Padding.


popup.popup_radius number

Radius. Corner radius of popup


popup.popup_header_type string

Header style.


Allowed values:

• block (Header block)
• inline (Header inline)

popup.popup_header_background color

Background.


popup.popup_header_text_color color

Text.


popup.popup_list_type string

List type.


Allowed values:

• table (fa-table)
• ul (fa-list)

popup.popup_list_label_weight string

Label weight.


Allowed values:

• normal (Normal)
• bold (Bold)

popup.popup_list_separator string

List separator.


Predefined values:

• : (:)
• – (–)
• (Empty space)
• <br /> (Line break)

popup.popup_shadow boolean

Shadow.


popup.popup_pointer boolean

Pointer.


popup.panel_position string

Allowed values:

• overlay (Overlay)
• left (Left)
• right (Right)
• top (Top)
• bottom (Bottom)

popup.panel_open_duration number

Open duration.


Max: 2000

popup.panel_side_fixed boolean

Always show.


popup.panel_side_default_content text

Placeholder content.


popup.panel_is_custom boolean

Panel content.


Allowed values:

• false (Auto)
• true (Custom)

popup.show_panel_styles boolean

Show panel styles.


popup.panel_custom_header html

Panel custom header. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for panel use.

Advanced users can add HTML for styling or add category colors to panel headers.

To hide parts of the panel when a column is empty using

{{#if column_name}}Content for non-empty column_name{{/if}}.

For example:

{{#if Capital name}}Capital:{{/if}} {{Capital name}}.

Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.


popup.panel_custom_main html

Panel custom main content. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for panel use.

Advanced users can add HTML for designs, styles, images, videos and embedded Flourish charts,

To hide parts of the panel when a column is empty using

{{#if column_name}}Content for non-empty column_name{{/if}}.

For example:

{{#if Capital name}}Capital:{{/if}} {{Capital name}}.

Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.


popup.panel_width_overlay number

Width (%).


popup.panel_height_overlay number

Height (%).


popup.panel_width_side number

Width (%).


popup.panel_height_side number

Height (%).


popup.panel_max_width number

Max width (px).


popup.panel_max_height number

Max height (px).


popup.panel_vertical_position string

Vertical position. Choosing Click position is especially useful when your visualization is really tall, this will make sure the panel content is always on top of the element you've clicked on


Allowed values:

• click (Click position)
• center (Center)

popup.panel_text_color color

Text color.


popup.panel_font_size number

Text size.


popup.panel_align string

Alignment.


Allowed values:

• start (fa-align-left)
• center (fa-align-center)
• end (fa-align-right)

popup.panel_background color

Fill color.


popup.panel_background_opacity number

Fill opacity.


Max: 1

popup.panel_padding number

Padding.


popup.panel_radius number

Radius. Corner radius of panel


popup.panel_list_type string

List type.


Allowed values:

• table (fa-table)
• ul (fa-list)

popup.panel_list_label_weight string

Label weight.


Allowed values:

• normal (Normal)
• bold (Bold)

popup.panel_list_separator string

List separator.


Predefined values:

• : (:)
• – (–)
• (Empty space)
• <br /> (Line break)

popup.panel_shadow boolean

Shadow.


Controls

panel_background_color color

Background.


panel_background_opacity number

Opacity.


Max: 1

panel_text_color color

Text color.


panel_text_size number

Text size.


panel_icon_color string

Icon color.


Allowed values:

• light (Light)
• dark (Dark)

panel_width number

Panel width. Width of the controls panels on wide screens, ignored on mobile


panel_cog_color color

Cog icon color.


panel_overlay boolean

Overlay panel over graphic.


panel_hide_cog boolean

Disable controls toggle in published graphic. When checked, the controls icon for showing/<a href="https://help.flourish.studio/article/365-how-to-hide-controls-in-a-published-survey-visualization>hiding the controls panel is visible only in the visualization and story editors – not in the published visualization or story.

When making a story, you can still lock the panel to be visible or hidden by clicking the cog icon in the story editor.


select_group_show boolean

Group menu. Populated by all category columns


select_color_show boolean

Color menu. Populated by all category columns


select_size_show boolean

Size menu. Populated by all continuous number columns


select_compare_show boolean

Compare menu. Populated by all category columns; appears only when Group by is selected


histogram_show boolean

Bar mode.


select_group_text string

Group by.


select_color_text string

Shade by.


select_size_text string

Size by.


select_compare_text string

Compare.


select_filter_text string

Filter.


select_map_text string

Group location.


controls_filter.control_type string

Control type. Choose between a dropdown, buttons or a time slider.


Allowed values:

• dropdown (data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAC0AAAAKCAYAAAFXtOeCAAAABGdBTUEAALGPC/xhBQAAADhlWElmTU0AKgAAAAgAAYdpAAQAAAABAAAAGgAAAAAAAqACAAQAAAABAAAALaADAAQAAAABAAAACgAAAAAWgdR+AAAAtklEQVQ4EdVV3QnEIAw25TbSB2foNI7iMu0MbuUR4ZOQy4OFCL2AmN8vMQallNLVez+DosNSsg/FGLtyDkR0H1rJMqOMiJxz4KWp1jpUsLNsptCBkD/MlFIgzx3IsD9GflTGTLvImN1ajP1x043dVrlr1fIY4xZZYd2kdATfWgu8NCEedtdWcJ+R1BVYnmIbsEzizW8bDO9CJd4cOijxCEH22DGIq1iyBiv2P8eDP4jVDrzE7/oCOyRFCckULykAAAAASUVORK5CYII=)
• buttons (data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAACsAAAAKCAYAAAFaqpfFAAAABGdBTUEAALGPC/xhBQAAADhlWElmTU0AKgAAAAgAAYdpAAQAAAABAAAAGgAAAAAAAqACAAQAAAABAAAAK6ADAAQAAAABAAAACgAAAACxtWN2AAAA5klEQVQ4EdVUwQ2DMAwkqBuFBzO0y2QUlqEz5AEzpTrUiyzLEEPbRy2F2D7n4tgWYRiGuZRy75T0lhMxIcZYoKzrWvUeDi0VTSlt2DRN9dQ4jh0WBP4avHneH3kF/SGE5w0GWXPOHRaFfrDiEW5mEJjBZJY7UoPNakjM0s0KWYFnfa6MUbRlWR573daXurLlhHDXJNreugan7D2D0K09YUeJy467no+D1iyRUO+u5+tDLdudaYuIOEcQtncMeba1/6QCrUuv4nWwJIE1ZBKHLgdJY0f2J9z/NQb4cRxV4iQ2y/hvc78ACNVvxtjAMtcAAAAASUVORK5CYII=)
• slider (data:image/png;base64,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)

controls_filter.control_styles boolean

Adv..


controls_filter.control_title string

Control title.


controls_filter.button_group boolean

Grouped.


Allowed values:

• true (On)
• false (Off)

controls_filter.button_group_width_mode string

Button group width.


Allowed values:

• auto (Auto)
• full (Full)
• fixed (Fixed)

controls_filter.button_group_width_fixed number

Width.


Max: 100

controls_filter.dropdown_width_mode string

Dropdown width.


Allowed values:

• auto (Auto)
• full (Full)
• fixed (Fixed)

controls_filter.dropdown_width_fixed number

Width.


Max: 100

controls_filter.slider_width number

Slider width. Width of the slider track in rems


Max: 100

controls_filter.slider_max_label_width number

Max label width. In rems, multiples of base font size. If larger than the longest label, only the space required to fit labels will be used.


Max: 100

controls_filter.slider_step_time number

Time between steps. Measured in seconds, positive values move the slider left to right, negative values move the slider right to left.


Min: -100

Max: 100

controls_filter.slider_loop boolean

Loop.


controls_filter.slider_restart_pause number

Pause before loop. Measured in seconds and in addition to the regular step time displayed above


Max: 100

controls_filter.sort boolean

Sorting.


Allowed values:

• true (On)
• false (Off)

column_filter_show_all boolean

Include "All" in slider/menu.


column_filter_show_all_label string

Label for All.


controls_style.font_size number

Text size.


Max: 5

controls_style.font_weight string

Text weight.


Allowed values:

• bold (Bold)
• normal (Normal)

controls_style.height number

Height.


Max: 5

button_style.background color

Background.


button_style.background_selected color

Selected.


button_style.background_hover color

Mouse over.


button_style.font_color color

Text color.


button_style.font_color_selected color

Selected.


button_style.font_color_hover color

Mouse over.


button_style.button_styles_advanced boolean

Button border styles.


button_style.border_width number

Border width.


Max: 20

button_style.border_color color

Color.


button_style.border_transparency number

Transparency.


Max: 1

button_style.border_radius number

Radius.


Max: 100

slider_style.track_color color

Track.


slider_style.font_color color

Text.


slider_style.handle_color color

Handle.


slider_style.play_color color

Play/pause.


slider_style.track_height number

Track height.


Max: 1

slider_style.handle_height number

Height.


Max: 10

slider_style.play_button boolean

Play button.


dropdown_style.background color

Background.


dropdown_style.font_color color

Text color.


dropdown_style.border_styles_advanced boolean

Dropdown border styles.


dropdown_style.border_style string

Border style. Show border on all sides, or only at the bottom


Allowed values:

• all (All sides)
• bottom (Bottom)

dropdown_style.border_width number

Border width.


Max: 20

dropdown_style.border_color color

Color.


dropdown_style.border_transparency number

Transparency.


Max: 1

dropdown_style.border_radius number

Radius.


Max: 100

Legend

legend_categorical.show_legend boolean

Legend mode. A legend will not show with a single entry


Allowed values:

• true (Enabled)
• false (Disabled)

legend_categorical.title_mode string

Title mode.


Allowed values:

• auto (Auto)
• custom (Custom)

legend_categorical.title string

Title.


legend_categorical.swatch_width number

Width.


legend_categorical.swatch_height number

Height.


legend_categorical.swatch_radius number

Roundness. The radius of the corners of the swatch (in pixels)


legend_categorical.legend_items_padding number

Padding. Padding between legend items (in rems)


legend_categorical.swatch_outline boolean

Outline. An optional outline for the swatch in the legend


legend_categorical.swatch_outline_color color

Color.


legend_categorical.order_override text

Custom order override. Manually specify the order of legend entries (one entry per line)


legend_categorical.icon_height number

Height. Height of icon (in rems)


legend_categorical.icon_color color

Color. Fallback color (icon color if not determined by template)


legend_categorical.max_width number

Max width.


legend_categorical.orientation string

Orientation.


Allowed values:

• horizontal (Horizontal)
• vertical (Vertical)

legend_position string

Position.


Allowed values:

• above (Above)
• below (Below)

legend_hide_space boolean

Remove space when empty. Turn off to avoid the legend taking up space when empty.

Leave on to avoid the graphic jumping up and down a little when the legend is revealed or hidden.


legend_container.alignment string

Alignment.


Allowed values:

• start (fa-align-left)
• center (fa-align-center)
• end (fa-align-right)

legend_container.orientation string

Orientation.


Allowed values:

• horizontal (Horizontal)
• vertical (Vertical)

legend_container.title_weight string

Title weight.


Allowed values:

• bold (Bold)
• normal (Normal)

legend_container.text_weight string

Text weight.


Allowed values:

• bold (Bold)
• normal (Normal)

legend_container.text_color color

Color.


legend_container.text_size number

Size.


Max: 10

Zoom

zoom_on_double_click boolean

Zoom on double click.


zoom_on_mousewheel boolean

Zoom on pinch/mousewheel.


Animations

transition_duration number

Duration. Time in milliseconds of each dot's animation


transition_stagger number

Stagger. The spread of time over which the dots start animating


Layout

layout.body_font font

Main font. This font will apply to the whole graphic by default. You can optionally change the font for the title, subtitle, footer, etc in the Header and Footer settings panels.


layout.font_color color

Text color. This color will apply to the whole graphic by default, You can optionally change the color for individual text elements, in other settings panels.


layout.background_color_enabled boolean

Color.


Allowed values:

• true (On)
• false (Off)

layout.background_image_enabled boolean

Image.


Allowed values:

• true (On)
• false (Off)

layout.background_color color

Background color.


layout.background_image_src url

Image URL.


layout.background_image_size string

Size.


Allowed values:

• cover (Fill)
• contain (Fit)
• auto (Original)
• 100% 100% (Stretch)

layout.background_image_position string

Position.


Allowed values:

• top left (Top left)
• top center (Top center)
• top right (Top right)
• center left (Center left)
• center center (Center)
• center right (Center right)
• bottom left (Bottom left)
• bottom center (Bottom center)
• bottom right (Bottom right)

layout.max_width_target string

Maximum width. Apply a maximum width to just the main graphic or everything (main graphic plus header, footer, etc).


Allowed values:

• none (None)
• wrapper (Everything)
• primary (Main graphic)

layout.max_width number

Maximum width. Leave blank to stretch to container width


Min: 50

layout.max_width_align string

Align.


Allowed values:

• left (fa-align-left)
• center (fa-align-center)
• right (fa-align-right)

layout.layout_order string

Layout order.


Allowed values:

• stack-default (Header – controls – legend – primary graphic – footer)
• stack-2 (Primary graphic – header – controls – legend – footer)
• stack-3 (Header – primary graphic – controls – legend – footer)
• stack-4 (Controls – primary graphic – header – controls – legend – footer)
• grid-1 (Grid mode: Primary graphic on the right)

layout.space_between_sections string

Space between sections.


Allowed values:

• 0.5 (▁)
• 1 (▃)
• 1.5 (▄)
• custom (...)

layout.space_between_sections_custom number

Custom.


Max: 100

layout.margin_top number

Top.


layout.margin_right number

Right.


layout.margin_bottom number

Bottom.


layout.margin_left number

Left.


layout.border.enabled boolean

Show borders around visualisation.


layout.border.top.width number

Top.


layout.border.top.style string

Style.


Allowed values:

• solid (Solid)
• dashed (Dashed)
• dotted (Dotted)

layout.border.top.color color

Color.


layout.border.right.width number

Right.


layout.border.right.style string

Style.


Allowed values:

• solid (Solid)
• dashed (Dashed)
• dotted (Dotted)

layout.border.right.color color

Color.


layout.border.bottom.width number

Bottom.


layout.border.bottom.style string

Style.


Allowed values:

• solid (Solid)
• dashed (Dashed)
• dotted (Dotted)

layout.border.bottom.color color

Color.


layout.border.left.width number

Left.


layout.border.left.style string

Style.


Allowed values:

• solid (Solid)
• dashed (Dashed)
• dotted (Dotted)

layout.border.left.color color

Color.


layout.read_direction string

Read direction. This will change the reading direction of the main text elements on the page. It's not possible to adjust this on all elements, such as axes.

Note that when direction is set to right to left any alignment icons will be reversed.


Allowed values:

• ltr (Left to right)
• rtl (Right to left)

layout.font_size_mobile_small number

layout.font_size_mobile_big number

layout.font_size_tablet number

layout.font_size_desktop number

layout.font_size_big_screen number

layout.breakpoint_mobile_small number

layout.breakpoint_mobile_big number

layout.breakpoint_tablet number

layout.breakpoint_desktop number

layout.breakpoint_big_screen number

Header

layout.header_align string

Alignment.


Allowed values:

• left (fa-align-left)
• center (fa-align-center)
• right (fa-align-right)

layout.title html

layout.title_styling boolean

Styling.


layout.title_font font

Title Font.


layout.title_size string

Size.


Allowed values:

• 1.4 (ᴀ)
• 1.6 (A)
• 2 (fa-font)
• custom (...)

layout.title_size_custom number

Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3


layout.title_weight string

Weight.


Allowed values:

• bold (Bold)
• normal (Regular)

layout.title_color color

Color.


layout.title_line_height number

Line height.


Max: 3

layout.title_space_above string

Space above.


Allowed values:

• 0 (▁)
• 0.5 (▃)
• 1 (▄)
• custom (...)

layout.title_space_above_custom number

Custom.


Max: 100

layout.subtitle html

layout.subtitle_styling boolean

Styling.


layout.subtitle_font font

Subtitle Font.


layout.subtitle_size string

Size.


Allowed values:

• 1.4 (ᴀ)
• 1.6 (A)
• 2 (fa-font)
• custom (...)

layout.subtitle_size_custom number

Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3


layout.subtitle_weight string

Weight.


Allowed values:

• bold (Bold)
• normal (Regular)

layout.subtitle_color color

Color.


layout.subtitle_line_height number

Line height.


Max: 3

layout.subtitle_space_above string

Space above.


Allowed values:

• 0 (▁)
• 0.5 (▃)
• 1 (▄)
• custom (...)

layout.subtitle_space_above_custom number

Custom.


Max: 100

layout.header_text html

layout.header_text_styling boolean

Styling.


layout.header_text_size string

Size.


Allowed values:

• 1.2 (ᴀ)
• 1.4 (A)
• 1.6 (fa-font)
• custom (...)

layout.header_text_size_custom number

Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3


layout.header_text_weight string

Weight.


Allowed values:

• bold (Bold)
• normal (Regular)

layout.header_text_color color

Color.


layout.header_text_line_height number

Line height.


Max: 3

layout.header_text_space_above string

Space above.


Allowed values:

• 0 (▁)
• 0.5 (▃)
• 1 (▄)
• custom (...)

layout.header_text_space_above_custom number

Custom.


Max: 100

layout.header_border string

Allowed values:

• top (Top)
• bottom (Bottom)
• top_and_bottom (Top & bottom)
• none (None)

layout.header_border_width number

Width.


layout.header_border_color color

Color.


layout.header_border_style string

Style.


Allowed values:

• solid (Solid)
• dashed (Dashed)
• dotted (Dotted)

layout.header_border_space number

Space. Space between border and header text


layout.header_logo_enabled boolean

Allowed values:

• true (Enabled)
• false (Disabled)

layout.header_logo_src url

Image.


layout.header_logo_alt string

Alt text.


layout.header_logo_link_url string

Link.


layout.header_logo_height number

Height.


layout.header_logo_align string

Align. Align logo inside either the header or the main visualization container


Allowed values:

• inside (Header)
• outside (Main container)

layout.header_logo_position_inside string

Position.


Allowed values:

• top (Top)
• left (Left)
• right (Right)

layout.header_logo_position_outside string

Position.


Allowed values:

• left (Left)
• right (Right)

layout.header_logo_margin_top number

Top.


layout.header_logo_margin_right number

Right.


layout.header_logo_margin_bottom number

Bottom.


layout.header_logo_margin_left number

Left.


Footer

layout.footer_align string

Alignment.


Allowed values:

• left (fa-align-left)
• center (fa-align-center)
• right (fa-align-right)
• justify (fa-align-justify)

layout.footer_text_size number

Size.


layout.footer_text_color color

Color.


layout.footer_styling boolean

Advanced footer styles.


layout.footer_font font

Font.


layout.footer_text_weight string

Weight.


Allowed values:

• bold (Bold)
• normal (Regular)

layout.source_name string

Source name.


layout.source_url string

Source url.


layout.multiple_sources boolean

Multiple sources.


layout.source_name_2 string

Source name.


layout.source_url_2 string

Source url.


layout.source_name_3 string

Source name.


layout.source_url_3 string

Source url.


layout.source_label string

Source label.


layout.footer_note html

Note. To add the time/date stamp of when the data was last updated add {{data_last_updated}}. For example, "Last updated at {{data_last_updated}}". To customize the format, use the advanced options below.


layout.footer_note_secondary html

Note (secondary). The secondary note is placed below the source and primary note. To add the time/date stamp of when the data was last updated add {{data_last_updated}}. For example, "Last updated at {{data_last_updated}}". To customize the format, use the advanced options below.


layout.advanced_note_styling boolean

Advanced.


layout.footer_timestamp_format string

Time/date stamp formatting.


Predefined values:

• %H:%M:%S (13:39:13)
• %I:%M %p (01:39 PM)
• %H:%M (13:39)
• %H:%M %p (13:39 PM)
• %H:%M:%S, %d %b %Y (13:39:13, 28 Jan 2024)
• %H:%M, %d %b %Y (13:39, 28 Jan 2024)
• %H:%M, %d/%m/%Y (13:39, 28/01/2024)
• %H:%M, %m/%d/%Y (13:39, 01/28/2024)
• %H:%M, %d-%m-%Y (13:39, 28-01-2024)
• %H:%M, %m-%d-%Y (13:39, 01-28-2024)
• %d %b %Y (28 Jan 2024)
• %m/%d/%Y (01/28/2024)
• %d/%m/%Y (28/01/2024)
• %m-%d-%Y (01-28-2024)
• %d-%m-%Y (28-01-2024)
• %Y-%m-%d (2024-01-28)
• %Y-%m-%d %H:%M:%S (2024-01-28 13:39:13)

layout.footer_logo_enabled boolean

Image.


Allowed values:

• true (Enabled)
• false (Disabled)

layout.footer_logo_src url

Image.


layout.footer_logo_src_light hidden

Image (light version). If provided this version will be used whenever the background color is dark


layout.footer_logo_alt string

Alt text.


layout.footer_logo_link_url string

Link.


layout.footer_logo_height number

Height.


layout.footer_logo_margin number

Margin.


layout.footer_logo_order string

Position.


Allowed values:

• left (Left)
• right (Right)

layout.footer_align_vertical string

V. align.


Allowed values:

• flex-start (Top)
• center (Center)
• flex-end (Bottom)

layout.footer_border string

Allowed values:

• top (Top)
• bottom (Bottom)
• top_and_bottom (Top & bottom)
• none (None)

layout.footer_border_width number

Width.


layout.footer_border_color color

Color.


layout.footer_border_style string

Style.


Allowed values:

• solid (Solid)
• dashed (Dashed)
• dotted (Dotted)

layout.footer_border_space number

Space. Space between border and footer text


Accessibility

layout.screenreader_text_primary text

Screenreader description. A text alternative to the visual content that will only be visible to screenreaders, e.g. “The line chart shows China consistently higher than the other countries since 1990”.

Do not replicate your title, since that will also be read by screenreaders.


layout.screenreader_label string

Screenreader label. A short text label given to the main Flourish embed wrapper to provide an accessible name that is only visible to screenreaders. Added in the form of an "aria-label".


layout.screenreader_hide_primary boolean

Screenreader mode for main visual container. Whether the main visual container is visible to screenreaders. (Text in the header and footer are always available to screenreaders.)


Allowed values:

• true (Hidden)
• false (Readable)