Radar chart
Updated 5 months ago to v3.10.4 by Flourish team
How to use this template
Radar chart
Radar or spider charts are widely used for visualising the attributes of people, places and other entities.
Getting started
Upload data with (at a minimum) one text column of names and three or more numeric columns of values. Note that the column chosen should be comparable, e.g. percentages or scores out of ten.
Optionally point to a column to filter by. This will create a dropdown, button group or slider for the end viewer.
Optionally set one or more columns for “Grid of charts (facets)" to create a menu from which the end viewer can group the radars onto different mini axes.
Tips
To make a radial bar chart, choose the "Star" mode, set the inner radius to 0 and choose a wide stroke width.
You can add radial labels around the edge of the chart to group the metrics into broader categories. To do this, look for the ”Outer Labels” setting under “Radial axis”.
Credits
The data for the Radar chart with filter, Radial bar chart and Stellar chart comes from Spotify's API and the Tidy Tuesday project. The data for the Polar chart wiht time slider comes from the Climate Lab Book.
API information
This section documents API usage specific to this template, so for an introduction we suggest you refer to the generic API documentation instead.
template: @flourish/radar
version: 3
Template data
There are three different formats in which you can supply data to this template. The most convenient for you to use likely depends on the source of your data, as described below.
1. Array of arrays, and a bindings object
You can supply arrays of arrays to opts.data, which might look
like:
{
data: {
data: [
[ "DataColumn1Value1", "DataColumn2Value1",
[ "DataColumn1Value2", "DataColumn2Value2",
[ "DataColumn1Value3", "DataColumn2Value3",
...
]
}
}
where each array of arrays represents the rows in a data sheet.
To tell the API how the values from each column should be
associated with the keys that the template is expecting, you must also supply
an object attached to opts.bindings. (The meanings of the
keys in the bindings object are documented
below.) The minimal bindings you can
supply for this template are as shown in this example:
{
template: "@flourish/radar",
version: "3",
bindings: {
data: {
name: 0, // index of a column in your data
}
},
data: {
data: [
[ "DataColumn1Value1", "DataColumn2Value1",
[ "DataColumn1Value2", "DataColumn2Value2",
[ "DataColumn1Value3", "DataColumn2Value3",
...
]
}
}
All possible bindings that you can supply are shown in this example:
{
template: "@flourish/radar",
version: "3",
bindings: {
data: {
name: 0, // index of a column in your data
values: [1, 2, ...], // index(es) of column(s) in your data
filter: 3, // index of a column in your data
color_category: 4, // index of a column in your data
facet: [5, 6, ...], // index(es) of column(s) in your data
metadata: [7, 8, ...], // index(es) of column(s) in your data
}
},
data: {
data: [
[ "DataColumn1Value1", "DataColumn2Value1",
[ "DataColumn1Value2", "DataColumn2Value2",
[ "DataColumn1Value3", "DataColumn2Value3",
...
]
}
}
2. Array of objects with arbitrary keys, and a bindings object
This format is most likely useful when you have data from an external source,
such as CSV data loaded from d3-dsv.
You should supply this attached to the opts.data, which might look
like:
{
data: [
{ "DataHeader1": ..., "DataHeader2": ..., ... },
{ "DataHeader1": ..., "DataHeader2": ..., ... },
{ "DataHeader1": ..., "DataHeader2": ..., ... },
...
]
}
... but with the keys being the column headers from your
source data instead. You must also supply an object attached to
opts.bindings. The minimal bindings you can
supply for this template are as shown in this example:
{
template: "@flourish/radar",
version: "3",
bindings: {
data: {
name: "DataHeader1",
}
},
data: {
data: [
{ "DataHeader1": ..., "DataHeader2": ..., ... },
{ "DataHeader1": ..., "DataHeader2": ..., ... },
{ "DataHeader1": ..., "DataHeader2": ..., ... },
...
]
}
}
All possible bindings that you can supply are shown in this example:
{
template: "@flourish/radar",
version: "3",
bindings: {
data: {
name: "DataHeader1",
values: ["DataHeader2", "DataHeader3", ...],
filter: "DataHeader4",
color_category: "DataHeader5",
facet: ["DataHeader6", "DataHeader7", ...],
metadata: ["DataHeader8", "DataHeader9", ...],
}
},
data: {
data: [
{ "DataHeader1": ..., "DataHeader2": ..., ... },
{ "DataHeader1": ..., "DataHeader2": ..., ... },
{ "DataHeader1": ..., "DataHeader2": ..., ... },
...
]
}
}
(As before, the keys containing "Header" would be replaced by column names from your data source.)
3. Array of objects with template-defined keys
There is an alternative format you can use, which is likely to be easier to
use if your data is not from a spreadsheet source. With this alternative format
you supply your data to the template as
an array of objects, attached to opts.data, where the keys must
be those used by the template, as documented below. In this case
there is no need to supply a bindings object, since the key names are already
those expected by the template. The required properties in the data
object are as follows (scroll down for a
description of what each property is):
{
template: "@flourish/radar",
version: "3",
data: {
data: [
{
name: ...,
values: [...],
facet: [...],
metadata: [...]
},
...
]
},
...
}
And the full list of all possible properties is as follows:
{
template: "@flourish/radar",
version: "3",
data: {
data: [
{
name: ...,
values: [...],
filter: ...,
color_category: ...,
facet: [...],
metadata: [...]
},
...
]
},
...
}
Meanings of the template data keys:
- data.name: A text column containing a name for each radar string
- data.values: Select three or more numerical columns number
- data.filter: If set, creates a filter menu or time slider string, number, datetime
- data.color_category: Add a category to color by. If empty, the "name" column will be used for colors. string
- data.facet: Create one column for each grouping you want to allow string
- data.metadata: Add any columns here containing extra content to show in the popups string, datetime, number
Template metadata
Note: metadata is optional, and the API will interpret your data for you if you do not specify it. A typical example of when specifying metadata can be useful is when column(s) in your data contain numbers or dates that you wish to format visually (e.g. to display a column containing MM/DD/YYYY dates in DD/MM/YYYY format).
This template supports an optional metadata property. metadata informs the template what type of data is in each of your columns, and how that data should be formatted visually.
You can specify metadata in one of three formats, depending on the format of opts.data.
1. Array of objects with column indexes as keys
You should supply metadata in this format when opts.data is in the previously described 'array of arrays' format. In this case, metadata should be an object with column index: column type object key/value pairs (column type objects must have type, type_id, and output_format_id keys, documented below):
{
template: "@flourish/radar",
version: "3",
...
data: {
data: [
[ "DataColumn1Value1", "DataColumn2Value1",
[ "DataColumn1Value2", "DataColumn2Value2",
[ "DataColumn1Value3", "DataColumn2Value3",
...
]
},
metadata: {
data: {
0: { type: ..., type_id: ..., output_format_id: ... },
1: { type: ..., type_id: ..., output_format_id: ... },
2: { type: ..., type_id: ..., output_format_id: ... },
}
},
...
}
2. Array of objects with column headers as keys
You should supply metadata in this format when opts.data is in the previously described 'array of objects with arbitrary keys' format. In this case, metadata should be an object with column header: column type object key/value pairs (column type objects must have type, type_id, and output_format_id keys, documented below):
{
template: "@flourish/radar",
version: "3",
data: {
data: [
{ "DataHeader1": ..., "DataHeader2": ..., ... },
{ "DataHeader1": ..., "DataHeader2": ..., ... },
{ "DataHeader1": ..., "DataHeader2": ..., ... },
...
]
},
metadata: {
data: {
"DataHeader1": { type: ..., type_id: ..., output_format_id: ... },
"DataHeader2": { type: ..., type_id: ..., output_format_id: ... },
"DataHeader3": { type: ..., type_id: ..., output_format_id: ... },
}
},
...
}
Column type objects:
Column type objects tell the API what type of data is in a column:
{
type: "number", // options also include 'string', and 'datetime'
type_id: "number$comma_point", // numbers in the format 13,429.17
output_format_id: "number$space_comma", // numbers in the format 13 429,17
}
For more information on valid column type values, see Recognized Type Formats.
Template settings
Options for opts.state.
Shapes
radars.curve string
Line curve. Allowed values:
radars.star boolean
Line shape. Allowed values:
radars.stroke_width number
Line width.
radars.stroke_opacity number
Line opacity. Max: 1
radars.fill_opacity number
Fill opacity. Max: 1
radars.star_inner_radius number
Star inner. The star shape's inner radius, as a percent of the max radius Max: 100
color.categorical_palette colors
color.categorical_extend boolean
Extend. Automatically generate additional colours when needed to avoid the palette colours being used more than once
color.categorical_custom_palette text
Custom overrides. Enter the label name for which you wish to set the color, followed by a colon and the desired color value.
Colors can be set using Hex, RGB, color names or RGBA, if you want to set the opacity. Multiple colors can be set using multiple lines. For example:
Party 1: red
Party 2: #4455AA
Party 3: rgb(30,168,26)
color.numeric_type string
Scale type. Allowed values:
color.binning boolean
In linear mode, the color scale will run as a smooth gradient between 2 colors. In binned mode, the gradient will be divided in smaller blocks. Allowed values:
color.bin_mode string
Binning mode. Allowed values:
color.bin_count number
Number of bins.
color.bin_thresholds string
Custom thresholds. Enter your desired thresholds, separating them with a ";". For instance, "5;10;15".
Bins form as follows:
For "5;10;15", you'll get four bins based on your data's range.
color.sequential_palette string
Palette. Allowed values:
color.sequential_reverse boolean
Reverse.
color.sequential_custom_min color
Minimum color.
color.sequential_custom_max color
Maximum color.
color.sequential_color_space string
Color space. Allowed values:
color.sequential_custom_domain boolean
Domain. Allowed values:
color.sequential_domain_min number
Min.
color.sequential_domain_max number
Max.
color.diverging_palette string
Palette. Allowed values:
color.diverging_reverse boolean
Reverse.
color.diverging_custom_min color
Minimum color.
color.diverging_custom_mid color
Midpoint color.
color.diverging_custom_max color
Maximum color.
color.diverging_color_space string
Color space. Allowed values:
color.diverging_custom_domain boolean
Domain. Allowed values:
color.diverging_domain_min number
Min.
color.diverging_domain_mid number
Mid.
color.diverging_domain_max number
Max.
facet_comparisons boolean
Show comparison lines in grid mode.
facet_comparison_stroke color
Line.
facet_comparison_stroke_width number
Line width.
facet_comparison_stroke_opacity number
Line opacity. Max: 1
facet_comparison_fill color
Fill.
facet_comparison_fill_opacity number
Fill opacity. Max: 1
Grid of charts
facets.columns_fixed boolean
Number of columns. In Auto mode, the number of columns will change with screen size Allowed values:
facets.min_width number
Min chart width. Determines how many columns of charts there should be in the grid. Ignored if you specify a fixed number of columns.
facets.max_width number
Max chart width. Determines how many columns of charts there should be in the grid. Ignored if you specify a fixed number of columns.
facets.columns number
Fixed number of columns. Min: 1
facets.gutter_w number
Horizontal margin.
facets.gutter_h number
Vertical margin.
facets.animation string
On data change. If a chart in the grid is removed, that cell can either be animated out (with another cell moving to take its place) or reused for the new data in that cell. Auto decides for you based on the data. Allowed values:
facets.titles boolean
Show titles.
facets.title_align string
Alignment. Allowed values:
facets.title_size number
Size. Relative to the width of the chart
facets.title_unit string
Scale with chart. Allowed values:
facets.title_color color
Color.
facets.title_padding_top number
Space above.
facets.title_padding_bottom number
Space below.
facets.title_bg string
Background. Allowed values:
facets.title_bg_color color
Color.
facets.title_bg_padding number
Padding. Horizontal space between text and background
Radial axis
Radial axis
radial_axis.axis_show boolean
Allowed values:
- true (Visible)
- false (Hidden)
radial_axis.x_line_color color
Line.
radial_axis.x_line_width number
Width.
radial_axis.x_tick_label_color color
Color.
radial_axis.x_tick_label_size number
Size.
radial_axis.x_tick_label_outline number
Outline. Max: 1
radial_axis.x_tick_label_weight string
Allowed values:
- 600 (Bold)
- 400 (Normal)
radial_axis.y_min number
Min value.
radial_axis.y_max number
Max value.
radial_axis.y_tick_number number
Number.
radial_axis.y_line_color color
Color.
radial_axis.y_line_width string
Width.
radial_axis.y_line_dash string
Dash.
radial_axis.y_line_dash_gap string
Gap.
radial_axis.y_tick_label_color color
Color.
radial_axis.y_tick_label_size number
Size.
radial_axis.y_tick_label_outline number
Outline. Max: 1
radial_axis.y_tick_label_space number
Space.
radial_axis.y_tick_label_weight string
Allowed values:
- 600 (Bold)
- 400 (Normal)
radial_axis.margin_top number
Top.
radial_axis.margin_right number
Right.
radial_axis.margin_bottom number
Bottom.
radial_axis.margin_left number
Left.
radial_axis.group_labels text
Outer labels. Enter one per line, with an angle and a label separated by a colon, such as:
50: My Label
radial_axis.group_labels_color color
Color.
radial_axis.group_labels_size number
Size.
radial_axis.group_labels_letter_spacing number
Letter spacing.
radial_axis.group_labels_space_above number
Space above.
radial_axis.group_labels_space_below number
Space below.
Legend
legend_container.alignment string
Alignment. Allowed values:
legend_container.orientation string
Orientation. Allowed values:
legend_container.title_weight string
Title weight. Allowed values:
legend_container.text_weight string
Text weight. Allowed values:
legend_container.text_color color
Color.
legend_container.text_size number
Size. Max: 10
legend.show_legend boolean
Allowed values:
- true (Enabled)
- false (Disabled)
legend.title_mode string
Title mode. Allowed values:
legend.title string
Title.
legend.swatch_width number
Width.
legend.swatch_height number
Height.
legend.swatch_radius number
Roundness. The radius of the corners of the swatch (in pixels)
legend.legend_items_padding number
Padding. Padding between legend items (in rems)
legend.swatch_outline boolean
Outline. An optional outline for the swatch in the legend
legend.swatch_outline_color color
Color.
legend.order_override text
Custom order override. Manually specify the order of legend entries (one entry per line)
legend.icon_height number
Height. Height of icon (in rems)
legend.icon_color color
Color. Fallback color (icon color if not determined by template)
legend.max_width number
Max width.
legend.orientation string
Orientation. Allowed values:
Controls
facet_control_show boolean
Show charts grid control.
facet_control_default string
Option to show on load. If you want to specify a different facet view to show on load either make a story or enter the label from the relevant button here. Case sensitive.
facet_control_none boolean
Include combined option.
facets_label_combined string
Combined label.
facet_control_individual boolean
Include separate option.
facets_label_separate string
Separate label.
facets_control.control_type string
Control type. Choose between a dropdown, buttons or a time slider. Allowed values:
facets_control.control_styles boolean
Adv..
facets_control.control_title string
Control title.
facets_control.button_group boolean
Grouped. Allowed values:
facets_control.button_group_width_mode string
Button group width. Allowed values:
facets_control.button_group_width_fixed number
Width. Max: 100
facets_control.dropdown_width_mode string
Dropdown width. Allowed values:
facets_control.dropdown_width_fixed number
Width. Max: 100
facets_control.slider_width number
Slider width. Width of the slider track in rems Max: 100
facets_control.slider_max_label_width number
Max label width. In rems, multiples of base font size. If larger than the longest label, only the space required to fit labels will be used. Max: 100
facets_control.slider_step_time number
Time between steps. Measured in seconds, positive values move the slider left to right, negative values move the slider right to left. Min: -100 Max: 100
facets_control.slider_loop boolean
Loop.
facets_control.slider_restart_pause number
Pause before loop. Measured in seconds and in addition to the regular step time displayed above Max: 100
facets_control.sort boolean
Sorting. Allowed values:
filter_control.control_type string
Control type. Choose between a dropdown, buttons or a time slider. Allowed values:
filter_control.control_styles boolean
Adv..
filter_control.control_title string
Control title.
filter_control.button_group boolean
Grouped. Allowed values:
filter_control.button_group_width_mode string
Button group width. Allowed values:
filter_control.button_group_width_fixed number
Width. Max: 100
filter_control.dropdown_width_mode string
Dropdown width. Allowed values:
filter_control.dropdown_width_fixed number
Width. Max: 100
filter_control.slider_width number
Slider width. Width of the slider track in rems Max: 100
filter_control.slider_max_label_width number
Max label width. In rems, multiples of base font size. If larger than the longest label, only the space required to fit labels will be used. Max: 100
filter_control.slider_step_time number
Time between steps. Measured in seconds, positive values move the slider left to right, negative values move the slider right to left. Min: -100 Max: 100
filter_control.slider_loop boolean
Loop.
filter_control.slider_restart_pause number
Pause before loop. Measured in seconds and in addition to the regular step time displayed above Max: 100
filter_control.sort boolean
Sorting. Allowed values:
filter_control_all string
Name for "All". Leave blank to not include an "All" option
filter_y_max boolean
Update axis y max when filtering.
style_controls.font_size number
Text size. Max: 5
style_controls.font_weight string
Text weight. Allowed values:
style_controls.height number
Height. Max: 5
style_button.background color
Background.
style_button.background_selected color
Selected.
style_button.background_hover color
Mouse over.
style_button.font_color color
Text color.
style_button.font_color_selected color
Selected.
style_button.font_color_hover color
Mouse over.
style_button.button_styles_advanced boolean
Button border styles.
style_button.border_width number
Border width. Max: 20
style_button.border_color color
Color.
style_button.border_transparency number
Transparency. Max: 1
style_button.border_radius number
Radius. Max: 100
style_dropdown.background color
Background.
style_dropdown.font_color color
Text color.
style_dropdown.border_styles_advanced boolean
Dropdown border styles.
style_dropdown.border_style string
Border style. Show border on all sides, or only at the bottom Allowed values:
style_dropdown.border_width number
Border width. Max: 20
style_dropdown.border_color color
Color.
style_dropdown.border_transparency number
Transparency. Max: 1
style_dropdown.border_radius number
Radius. Max: 100
style_slider.track_color color
Track.
style_slider.font_color color
Text.
style_slider.handle_color color
Handle.
style_slider.play_color color
Play/pause.
style_slider.track_height number
Track height. Max: 1
style_slider.handle_height number
Height. Max: 10
style_slider.play_button boolean
Play button.
controls_container.alignment string
Alignment. Allowed values:
controls_container.controls_spacing number
Spacing. The space between controls, like dropdowns and adjacent button sets, in em units. Max: 5
Popups & panels
popup.mode string
Allowed values:
- none (None)
- popup (Popup)
- panel (Panel)
- both (Both)
popup.popup_is_custom boolean
Popup content. Allowed values:
popup.show_popup_styles boolean
Show popup styles.
popup.popup_custom_header html
Popup custom header. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for popup use.
Advanced users can add HTML styling or add category colors to popup headers.
To hide parts of the popup when a column is empty using {{#if column_name}}Content for non-empty column_name{{/if}}. For example: {{#if Capital name}}Capital:{{/if}} {{Capital name}}. Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.
popup.popup_custom_main html
Popup custom main content. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for popup use.
Advanced users can add HTML for designs, styles, and images.
To hide parts of the popup when a column is empty use the syntax {{#if column_name}}Content for non-empty column_name{{/if}}. For example: {{#if Capital name}}Capital:{{/if}} {{Capital name}}. Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.
popup.popup_custom_accessible text
Popup custom accessible content. A text alternative to visual custom popup content that will be read out by screenreaders. This content is added as an aria-label attribute to data point elements. You can still use {{column_name}} to add values from your data, but do not use HTML. For example: {Name}}, Population: {{Population}}, GDP: {{GDP}} If left empty, accessible content will fallback to the default popup content.
popup.popup_width number
Max width. In rems, multiples of base font size. Leave blank to let the width adjust based on the contents.
popup.popup_font_size number
Text size.
popup.popup_text_color color
Text color.
popup.popup_align string
Align. Allowed values:
popup.popup_background color
Fill color.
popup.popup_background_opacity number
Fill opacity. Max: 1
popup.popup_padding number
Padding.
popup.popup_radius number
Radius. Corner radius of popup
popup.popup_header_type string
Header style. Allowed values:
popup.popup_header_background color
Background.
popup.popup_header_text_color color
Text.
popup.popup_list_type string
List type. Allowed values:
popup.popup_list_label_weight string
Label weight. Allowed values:
popup.popup_list_separator string
List separator. Predefined values:
popup.popup_shadow boolean
Shadow.
popup.popup_pointer boolean
Pointer.
popup.panel_position string
Allowed values:
- overlay (Overlay)
- left (Left)
- right (Right)
- top (Top)
- bottom (Bottom)
popup.panel_open_duration number
Open duration. Max: 2000
popup.panel_side_fixed boolean
Always show.
popup.panel_side_default_content text
Placeholder content.
popup.panel_is_custom boolean
Panel content. Allowed values:
popup.show_panel_styles boolean
Show panel styles.
popup.panel_custom_header html
Panel custom header. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for panel use.
Advanced users can add HTML for styling or add category colors to panel headers.
To hide parts of the panel when a column is empty using {{#if column_name}}Content for non-empty column_name{{/if}}. For example: {{#if Capital name}}Capital:{{/if}} {{Capital name}}. Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.
popup.panel_custom_main html
Panel custom main content. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for panel use.
Advanced users can add HTML for designs, styles, images, videos and embedded Flourish charts,
To hide parts of the panel when a column is empty using {{#if column_name}}Content for non-empty column_name{{/if}}. For example: {{#if Capital name}}Capital:{{/if}} {{Capital name}}. Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.
popup.panel_width_overlay number
Width (%).
popup.panel_height_overlay number
Height (%).
popup.panel_width_side number
Width (%).
popup.panel_height_side number
Height (%).
popup.panel_max_width number
Max width (px).
popup.panel_max_height number
Max height (px).
popup.panel_vertical_position string
Vertical position. Choosing Click position is especially useful when your visualization is really tall, this will make sure the panel content is always on top of the element you've clicked on Allowed values:
popup.panel_text_color color
Text color.
popup.panel_font_size number
Text size.
popup.panel_align string
Alignment. Allowed values:
popup.panel_background color
Fill color.
popup.panel_background_opacity number
Fill opacity. Max: 1
popup.panel_padding number
Padding.
popup.panel_radius number
Radius. Corner radius of panel
popup.panel_list_type string
List type. Allowed values:
popup.panel_list_label_weight string
Label weight. Allowed values:
popup.panel_list_separator string
List separator. Predefined values:
popup.panel_shadow boolean
Shadow.
popup_color_headings boolean
Color popup headings.
Animation
duration number
Duration. In seconds
Number styles
formatting.prefix string
Prefix. Text to place in front of a number
formatting.suffix string
Suffix. Text to place after a number
formatting.n_dec number
Decimal places. Decimal places. You can also enter a negative integer to round to a whole number with that many zeros. For example, -2 will round to the nearest hundred. Min: -10 Max: 10
formatting.advanced boolean
Advanced.
formatting.negative_sign string
Styling of negative numbers. Allowed values:
formatting.strip_zeros boolean
Remove trailing zeros.
formatting.strip_separator boolean
Hide thousands separator below 10,000. Turn off if you want four-digit numbers to include a separator, e.g. “1,234” rather than “1234”.
formatting.transform_labels boolean
Multiply/divide values.
formatting.transform string
Allowed values:
- multiply (Multiply by)
- divide (Divide by)
- exponentiate (×10 to the power of)
formatting.multiply_divide_constant number
formatting.exponentiate_constant number
Layout
layout.body_font font
Main font. This font will apply to the whole graphic by default. You can optionally change the font for the title, subtitle, footer, etc in the Header and Footer settings panels.
layout.font_color color
Text color. This color will apply to the whole graphic by default, You can optionally change the color for individual text elements, in other settings panels.
layout.background_color_enabled boolean
Color. Allowed values:
layout.background_image_enabled boolean
Image. Allowed values:
layout.background_color color
Background color.
layout.background_image_src url
Image URL.
layout.background_image_size string
Size. Allowed values:
layout.background_image_position string
Position. Allowed values:
layout.max_width_target string
Maximum width. Apply a maximum width to just the main graphic or everything (main graphic plus header, footer, etc). Allowed values:
layout.max_width number
Maximum width. Leave blank to stretch to container width Min: 50
layout.max_width_align string
Align. Allowed values:
layout.layout_order string
Layout order. Allowed values:
layout.space_between_sections string
Space between sections. Allowed values:
layout.space_between_sections_custom number
Custom. Max: 100
layout.margin_top number
Top.
layout.margin_right number
Right.
layout.margin_bottom number
Bottom.
layout.margin_left number
Left.
layout.border.enabled boolean
Show borders around visualisation.
layout.border.top.width number
Top.
layout.border.top.style string
Style. Allowed values:
layout.border.top.color color
Color.
layout.border.right.width number
Right.
layout.border.right.style string
Style. Allowed values:
layout.border.right.color color
Color.
layout.border.bottom.width number
Bottom.
layout.border.bottom.style string
Style. Allowed values:
layout.border.bottom.color color
Color.
layout.border.left.width number
Left.
layout.border.left.style string
Style. Allowed values:
layout.border.left.color color
Color.
layout.read_direction string
Read direction. This will change the reading direction of the main text elements on the page. It's not possible to adjust this on all elements, such as axes. Allowed values:
Note that when direction is set to right to left any alignment icons will be reversed.
layout.font_size_mobile_small number
layout.font_size_mobile_big number
layout.font_size_tablet number
layout.font_size_desktop number
layout.font_size_big_screen number
layout.breakpoint_mobile_small number
layout.breakpoint_mobile_big number
layout.breakpoint_tablet number
layout.breakpoint_desktop number
layout.breakpoint_big_screen number
Header
layout.header_align string
Alignment. Allowed values:
layout.title html
layout.title_styling boolean
Styling.
layout.title_font font
Title Font.
layout.title_size string
Size. Allowed values:
layout.title_size_custom number
Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3
layout.title_weight string
Weight. Allowed values:
layout.title_color color
Color.
layout.title_line_height number
Line height. Max: 3
layout.title_space_above string
Space above. Allowed values:
layout.title_space_above_custom number
Custom. Max: 100
layout.subtitle html
layout.subtitle_styling boolean
Styling.
layout.subtitle_font font
Subtitle Font.
layout.subtitle_size string
Size. Allowed values:
layout.subtitle_size_custom number
Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3
layout.subtitle_weight string
Weight. Allowed values:
layout.subtitle_color color
Color.
layout.subtitle_line_height number
Line height. Max: 3
layout.subtitle_space_above string
Space above. Allowed values:
layout.subtitle_space_above_custom number
Custom. Max: 100
layout.header_text html
layout.header_text_styling boolean
Styling.
layout.header_text_size string
Size. Allowed values:
layout.header_text_size_custom number
Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3
layout.header_text_weight string
Weight. Allowed values:
layout.header_text_color color
Color.
layout.header_text_line_height number
Line height. Max: 3
layout.header_text_space_above string
Space above. Allowed values:
layout.header_text_space_above_custom number
Custom. Max: 100
layout.header_border string
Allowed values:
- top (Top)
- bottom (Bottom)
- top_and_bottom (Top & bottom)
- none (None)
layout.header_border_width number
Width.
layout.header_border_color color
Color.
layout.header_border_style string
Style. Allowed values:
layout.header_border_space number
Space. Space between border and header text
layout.header_logo_enabled boolean
Allowed values:
- true (Enabled)
- false (Disabled)
layout.header_logo_src url
Image.
layout.header_logo_alt string
Alt text.
layout.header_logo_link_url string
Link.
layout.header_logo_height number
Height.
layout.header_logo_align string
Align. Align logo inside either the header or the main visualization container Allowed values:
layout.header_logo_position_inside string
Position. Allowed values:
layout.header_logo_position_outside string
Position. Allowed values:
layout.header_logo_margin_top number
Top.
layout.header_logo_margin_right number
Right.
layout.header_logo_margin_bottom number
Bottom.
layout.header_logo_margin_left number
Left.
Footer
layout.footer_align string
Alignment. Allowed values:
layout.footer_text_size number
Size.
layout.footer_text_color color
Color.
layout.footer_styling boolean
Advanced footer styles.
layout.footer_font font
Font.
layout.footer_text_weight string
Weight. Allowed values:
layout.source_name string
Source name.
layout.source_url string
Source url.
layout.multiple_sources boolean
Multiple sources.
layout.source_name_2 string
Source name.
layout.source_url_2 string
Source url.
layout.source_name_3 string
Source name.
layout.source_url_3 string
Source url.
layout.source_label string
Source label.
layout.footer_note html
Note.
layout.footer_note_secondary html
Note (secondary). The secondary note is placed below the source and primary note
layout.footer_logo_enabled boolean
Image. Allowed values:
layout.footer_logo_src url
Image.
layout.footer_logo_src_light hidden
Image (light version). If provided this version will be used whenever the background color is dark
layout.footer_logo_alt string
Alt text.
layout.footer_logo_link_url string
Link.
layout.footer_logo_height number
Height.
layout.footer_logo_margin number
Margin.
layout.footer_logo_order string
Position. Allowed values:
layout.footer_align_vertical string
V. align. Allowed values:
layout.footer_border string
Allowed values:
- top (Top)
- bottom (Bottom)
- top_and_bottom (Top & bottom)
- none (None)
layout.footer_border_width number
Width.
layout.footer_border_color color
Color.
layout.footer_border_style string
Style. Allowed values:
layout.footer_border_space number
Space. Space between border and footer text
Accessibility
layout.screenreader_text_primary text
Screenreader description. A text alternative to the visual content that will only be visible to screenreaders, e.g. “The line chart shows China consistently higher than the other countries since 1990”.
Do not replicate your title, since that will also be read by screenreaders.
layout.screenreader_label string
Screenreader label. A short text label given to the main Flourish embed wrapper to provide an accessible name that is only visible to screenreaders. Added in the form of an "aria-label".
layout.screenreader_hide_primary boolean
Screenreader mode for main visual container. Whether the main visual container is visible to screenreaders. (Text in the header and footer are always available to screenreaders.) Allowed values:
