3D globe

Convey complex spatiotemporal information in a visually engaging way

Updated 12 days ago to v1.7.2 by Flourish team

How to use this template

3D globe

Convey complex spatiotemporal information in a visually engaging way

Credits

The default data and Animated starting point show data on earthquakes from NOAA. The color and size starting point shows data on world cities from SimpleMaps.

This section documents API usage specific to this template, so for an introduction we suggest you refer to the generic API documentation instead.

template: @flourish/globe

version: 1

Template data

There are three different formats in which you can supply data to this template. The most convenient for you to use likely depends on the source of your data, as described below.

1. Array of arrays, and a bindings object

You can supply arrays of arrays to opts.data, which might look like:

{
    data: {
        points: [
            [ "PointsColumn1Value1", "PointsColumn2Value1",
            [ "PointsColumn1Value2", "PointsColumn2Value2",
            [ "PointsColumn1Value3", "PointsColumn2Value3",
            ...
        ]
    }
}

where each array of arrays represents the rows in a data sheet.

To tell the API how the values from each column should be associated with the keys that the template is expecting, you must also supply an object attached to opts.bindings. (The meanings of the keys in the bindings object are documented below.) The minimal bindings you can supply for this template are as shown in this example:

{
    template: "@flourish/globe",
    version: "1",
    bindings: {
        points: {
            lat: 1, // index of a column in your data
            lng: 2, // index of a column in your data
        }
    },
    data: {
        points: [
            [ "PointsColumn1Value1", "PointsColumn2Value1",
            [ "PointsColumn1Value2", "PointsColumn2Value2",
            [ "PointsColumn1Value3", "PointsColumn2Value3",
            ...
        ]
    }
}

All possible bindings that you can supply are shown in this example:

{
    template: "@flourish/globe",
    version: "1",
    bindings: {
        points: {
            name: 0, // index of a column in your data
            lat: 1, // index of a column in your data
            lng: 2, // index of a column in your data
            radius: 3, // index of a column in your data
            color: 4, // index of a column in your data
            start_time: 5, // index of a column in your data
            end_time: 6, // index of a column in your data
            filter: 7, // index of a column in your data
            metadata: [8, 9, ...], // index(es) of column(s) in your data
        }
    },
    data: {
        points: [
            [ "PointsColumn1Value1", "PointsColumn2Value1",
            [ "PointsColumn1Value2", "PointsColumn2Value2",
            [ "PointsColumn1Value3", "PointsColumn2Value3",
            ...
        ]
    }
}

2. Array of objects with arbitrary keys, and a bindings object

This format is most likely useful when you have data from an external source, such as CSV data loaded from d3-dsv. You should supply this attached to the opts.data, which might look like:

{
        points: [
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            ...
        ]
    }

... but with the keys being the column headers from your source data instead. You must also supply an object attached to opts.bindings. The minimal bindings you can supply for this template are as shown in this example:

{
    template: "@flourish/globe",
    version: "1",
    bindings: {
        points: {
            lat: "PointsHeader2",
            lng: "PointsHeader3",
        }
    },
    data: {
        points: [
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            ...
        ]
    }
}

All possible bindings that you can supply are shown in this example:

{
    template: "@flourish/globe",
    version: "1",
    bindings: {
        points: {
            name: "PointsHeader1",
            lat: "PointsHeader2",
            lng: "PointsHeader3",
            radius: "PointsHeader4",
            color: "PointsHeader5",
            start_time: "PointsHeader6",
            end_time: "PointsHeader7",
            filter: "PointsHeader8",
            metadata: ["PointsHeader9", "PointsHeader10", ...],
        }
    },
    data: {
        points: [
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            ...
        ]
    }
}

(As before, the keys containing "Header" would be replaced by column names from your data source.)

3. Array of objects with template-defined keys

There is an alternative format you can use, which is likely to be easier to use if your data is not from a spreadsheet source. With this alternative format you supply your data to the template as an array of objects, attached to opts.data, where the keys must be those used by the template, as documented below. In this case there is no need to supply a bindings object, since the key names are already those expected by the template. The required properties in the data object are as follows (scroll down for a description of what each property is):

{
    template: "@flourish/globe",
    version: "1",
    data: {
    points: [
        {
            lat: ...,
            lng: ...,
            metadata: [...]
        },
        ...
    ]
},
    ...
}

And the full list of all possible properties is as follows:

{
    template: "@flourish/globe",
    version: "1",
    data: {
    points: [
        {
            name: ...,
            lat: ...,
            lng: ...,
            radius: ...,
            color: ...,
            start_time: ...,
            end_time: ...,
            filter: ...,
            metadata: [...]
        },
        ...
    ]
},
    ...
}

Meanings of the template data keys:

  • points.name: Use this binding to add a title to your points' popups. string
  • points.lat: lat number
  • points.lng: lng number
  • points.radius: radius number
  • points.color: color number, string
  • points.start_time: start_time datetime
  • points.end_time: end_time datetime
  • points.filter: filter string, number, datetime
  • points.metadata: Makes additional columns (text, emoji, image URLs, etc) available in custom popups string, number, datetime

Template metadata

Note: metadata is optional, and the API will interpret your data for you if you do not specify it. A typical example of when specifying metadata can be useful is when column(s) in your data contain numbers or dates that you wish to format visually (e.g. to display a column containing MM/DD/YYYY dates in DD/MM/YYYY format).

This template supports an optional metadata property. metadata informs the template what type of data is in each of your columns, and how that data should be formatted visually.

You can specify metadata in one of three formats, depending on the format of opts.data.

1. Array of objects with column indexes as keys

You should supply metadata in this format when opts.data is in the previously described 'array of arrays' format. In this case, metadata should be an object with column index: column type object key/value pairs (column type objects must have type, type_id, and output_format_id keys, documented below):

{
    template: "@flourish/globe",
    version: "1",
    ...
    data: {
        points: [
            [ "PointsColumn1Value1", "PointsColumn2Value1",
            [ "PointsColumn1Value2", "PointsColumn2Value2",
            [ "PointsColumn1Value3", "PointsColumn2Value3",
            ...
        ]
    },
    metadata: {
        points: {
            0: { type: ..., type_id: ..., output_format_id: ... },
            1: { type: ..., type_id: ..., output_format_id: ... },
        }
    },
    ...
}

2. Array of objects with column headers as keys

You should supply metadata in this format when opts.data is in the previously described 'array of objects with arbitrary keys' format. In this case, metadata should be an object with column header: column type object key/value pairs (column type objects must have type, type_id, and output_format_id keys, documented below):

{
    template: "@flourish/globe",
    version: "1",
    data: {
        points: [
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            { "PointsHeader1": ..., "PointsHeader2": ..., ... },
            ...
        ]
    },
    metadata: {
        points: {
            "PointsHeader1": { type: ..., type_id: ..., output_format_id: ... },
            "PointsHeader2": { type: ..., type_id: ..., output_format_id: ... },
        }
    },
    ...
}

Column type objects:

Column type objects tell the API what type of data is in a column:

{
    type: "number", // options also include 'string', and 'datetime'
    type_id: "number$comma_point", // numbers in the format 13,429.17
    output_format_id: "number$space_comma", // numbers in the format 13 429,17
}

For more information on valid column type values, see Recognized Type Formats.

Template settings

Options for opts.state.

Globe

globe.style string

Globe style.

Allowed values:

  • realistic (Realistic)
  • solid (Stylized)

globe.realistic_clouds_enabled boolean

Display clouds.

globe.solid_theme string

Theme.

Allowed values:

  • flourish-light (Flourish light)
  • flourish-dark (Flourish dark)
  • flourish-night (Flourish night)
  • pale-blue-dot (Pale blue dot)
  • neon-dark (Brushed metal)
  • dark-blue (Dark blue)
  • ghost (Ghost)

globe.is_custom hidden

Customise appearance.

globe.solid_custom_ocean color

Ocean.

globe.solid_custom_land color

Land.

globe.solid_custom_border color

Borders.

globe.solid_ambient_color color

Ambient.

globe.solid_shadow_color color

Shadow.

globe.solid_halo_color color

Halo.

globe.solid_halo_blend string

Halo blend mode.

Allowed values:

  • normal (Normal)
  • additive (Additive)
  • subtractive (Subtractive)

globe.solid_stroke_width number

Globe outline width.

globe.sun_direction_kind string

Sun direction.

Allowed values:

  • night (Always night)
  • day (Always day)
  • camera (Follow camera)
  • realtime (Realtime)
  • latlng (Latitude/longitude)
  • timeline (Time in timeline)

globe.sun_direction_lat number

Latitude.

globe.sun_direction_lng number

Longitude.

background.type string

Allowed values:

  • stars (Enabled)
  • transparent (Disabled)

globe.stars_color_background color

Background.

globe.stars_color_stars color

Stars.

background.stars_size number

Star size.

Points

points.default_color color

Color.

points.point_opacity number

Opacity.

Max: 100

points.point_max_size number

Max. size.

Max: 100

color.categorical_palette colors

Palette.

color.categorical_extend boolean

Extend. Automatically generate additional colours when needed to avoid the palette colours being used more than once

color.categorical_custom_palette text

Custom overrides. Enter the label name for which you wish to set the color, followed by a colon and the desired color value.

Colors can be set using Hex, RGB, color names or RGBA, if you want to set the opacity. Multiple colors can be set using multiple lines. For example:


Party 1: red
Party 2: #4455AA
Party 3: rgb(30,168,26)

color.numeric_type string

Scale type.

Allowed values:

  • sequential (Sequential)
  • diverging (Diverging)

color.binning boolean

In linear mode, the color scale will run as a smooth gradient between 2 colors. In binned mode, the gradient will be divided in smaller blocks.

Allowed values:

  • false (Linear)
  • true (Binned)

color.bin_mode string

Binning mode.

Allowed values:

  • fixed (Fixed width)
  • quantile (Quantile)
  • custom (Custom thresholds)

color.bin_count number

Number of bins.

color.bin_thresholds string

Custom thresholds. Enter your desired thresholds, separating them with a ";". For instance, "5;10;15".

Bins form as follows:

  • From the data's minimum value (domain minimum) up to the first threshold.
  • Between consecutive thresholds.
  • From the last threshold to the data's maximum value (domain maximum).

    • For "5;10;15", you'll get four bins based on your data's range.

      color.sequential_palette string

      Palette.

      Allowed values:

      • Oranges (Oranges)
      • Reds (Reds)
      • Blues (Blues)
      • Greens (Greens)
      • Greys (Greys)
      • Purples (Purples)
      • Viridis (Viridis)
      • Inferno (Inferno)
      • Magma (Magma)
      • Plasma (Plasma)
      • Warm (Warm)
      • Cool (Cool)
      • CubehelixDefault (Cubehelix)
      • BuGn (Blue/Green)
      • BuPu (Blue/Purple)
      • GnBu (Green/Blue)
      • OrRd (Orange/Red)
      • PuBuGn (Purple/Blue/Green)
      • PuBu (Purple/Blue)
      • PuRd (Purple/Red)
      • RdPu (Red/Purple)
      • YlGnBu (Yellow/Blue/Green)
      • YlGn (Yellow/Green)
      • YlOrBr (Yellow/Orange/Brown)
      • YlOrRd (Yellow/Orange/Red)
      • Carrots
      • Custom

      color.sequential_reverse boolean

      Reverse.

      color.sequential_custom_min color

      Minimum color.

      color.sequential_custom_max color

      Maximum color.

      color.sequential_color_space string

      Color space.

      Allowed values:

      • rgb (RGB)
      • lab (LAB)
      • hcl (HCL)
      • hsl (HSL)

      color.sequential_custom_domain boolean

      Domain.

      Allowed values:

      • false (Auto)
      • true (Custom)

      color.sequential_domain_min number

      Min.

      color.sequential_domain_max number

      Max.

      color.diverging_palette string

      Palette.

      Allowed values:

      • RdBu (Red/Blue)
      • RdYlGn (Red/Yellow/Green)
      • PiYG (Pink/Yellow/Green)
      • BrBG (Brown/Blue/Green)
      • PRGn (Purple/Red/Green)
      • PuOr (Purple/Orange)
      • RdGy (Red/Grey)
      • RdYlBu (Red/Yellow/Blue)
      • Spectral (Spectral)
      • Custom

      color.diverging_reverse boolean

      Reverse.

      color.diverging_custom_min color

      Minimum color.

      color.diverging_custom_mid color

      Midpoint color.

      color.diverging_custom_max color

      Maximum color.

      color.diverging_color_space string

      Color space.

      Allowed values:

      • rgb (RGB)
      • lab (LAB)
      • hcl (HCL)
      • hsl (HSL)

      color.diverging_custom_domain boolean

      Domain.

      Allowed values:

      • false (Auto)
      • true (Custom)

      color.diverging_domain_min number

      Min.

      color.diverging_domain_mid number

      Mid.

      color.diverging_domain_max number

      Max.

      points.outline_mode string

      Mode.

      Allowed values:

      • none (None)
      • auto (Auto)
      • fixed (Fixed)

      points.outline_opacity number

      Opacity.

      Max: 100

      points.outline_width number

      Width.

      Max: 16

      points.outline_color color

      Color.

      points.transition_style string

      Style.

      Allowed values:

      • appear (Appear)
      • grow (Grow)
      • fade (Fade)

      points.transition_duration number

      Duration (s).

      Max: 10

      points.formatting.prefix string

      Prefix. Text to place in front of a number

      points.formatting.suffix string

      Suffix. Text to place after a number

      points.formatting.n_dec number

      Decimal places. Decimal places. You can also enter a negative integer to round to a whole number with that many zeros. For example, -2 will round to the nearest hundred.

      Min: -10

      Max: 10

      points.formatting.advanced boolean

      Advanced.

      points.formatting.negative_sign string

      Styling of negative numbers.

      Allowed values:

      • -$nk (-$100k)
      • $-nk ($-100k)
      • ($nk) (($100k))
      • $(n)k ($(100)k)
      • none ($100k)

      points.formatting.strip_zeros boolean

      Remove trailing zeros.

      points.formatting.strip_separator boolean

      Hide thousands separator below 10,000. Turn off if you want four-digit numbers to include a separator, e.g. “1,234” rather than “1234”.

      points.formatting.transform_labels boolean

      Multiply/divide values.

      points.formatting.transform string

      Allowed values:

      • multiply (Multiply by)
      • divide (Divide by)
      • exponentiate (×10 to the power of)

      points.formatting.multiply_divide_constant number

      points.formatting.exponentiate_constant number

      Camera and controls

      viewport.mode string

      Starting location. Control the viewpoint of your globe when users access it for the first time.

      Allowed values:

      • auto (Auto)
      • preset (Preset)
      • manual (Manual)

      viewport.preset_id string

      Allowed values:

      • timezone (Based on viewer's timezone)
      • africa (Africa)
      • antarctica (Antarctica)
      • asia (Asia)
      • oceania (Australia/Oceania)
      • europe (Europe)
      • north america (North America)
      • south america (South America)

      viewport.manual_lat number

      Latitude.

      viewport.manual_lng number

      Longitude.

      viewport.manual_zoom number

      Zoom.

      Max: 2.5

      interaction.is_interactive boolean

      Allow user interaction. When enabled, allows control over user interaction, including panning, zooming and rotating the globe.

      interaction.allow_rotation boolean

      Allow rotation. When enabled, allows the user to click and drag to rotate the globe.

      interaction.allow_zoom boolean

      Allow zoom. When enabled, allows the user to zoom in and out.

      interaction.block_native_scroll boolean

      Require user to hold down cmd/ctrl to zoom. When enabled, the user must hold down the cmd or ctrl key to be able zoom in or out when scrolling. It's recommended this setting is enabled when the visualisation is expected to take up a large part of the screen, as without it they might not be able to scroll past the visualisation.

      camera.transition_duration number

      Duration between slides (seconds). The amount of time to spend animating between slides in the story editor.

      Max: 20

      Timeline

      timeline.enabled boolean

      Allowed values:

      • true (Enabled)
      • false (Disabled)

      timeline.style string

      Style.

      Allowed values:

      • timeline (Timeline)
      • button (Play/pause)

      timeline.graph boolean

      Show chart.

      Allowed values:

      • true (Show)
      • false (Hide)

      timeline.play_on_load boolean

      Play on load.

      timeline.loop boolean

      Loop timeline. When turned on, the timeline will return to the beginning once complete. Otherwise, it will stop when it reaches the end.

      timeline.duration number

      Timeline duration. Total duration of the timeline during normal playback in seconds.

      timeline.duration_tween number

      Time jump duration. Duration of transitions between different points in time on the timeline.

      This is the transition you see in the story player when switching between slides with a different time on the timeline (in seconds).

      timeline.duration_wait_at_end number

      Pause before loop.

      timeline.axes_custom_enabled boolean

      Axis settings.

      timeline.color_axes color

      Axes color.

      timeline.axis_font_size number

      Font size.

      Max: 3

      timeline.date_format_display string

      X axis date format.

      Predefined values:

      • (Auto)
      • %Y-%m-%dT%H:%M:%S.%LZ (1986-01-28T11:39:13.000Z)
      • %Y-%m-%d (1986-01-28)
      • %m/%d/%Y (01/28/1986)
      • %d/%m/%Y (28/01/1986)
      • %d-%b-%y (28-Jan-86)
      • %m/%Y (01/1986)
      • %b %Y (Jan 1986)
      • %b '%y (Jan '86)
      • %B %d (January 28)
      • %d %b (28 Jan)
      • %Y (1986)
      • %B (January)
      • %b (Jan)
      • %A (Tuesday)
      • %a (Tue)
      • %H:%M:%S (11:39:13)
      • %I:%M %p (11:39 AM)
      • %H:%M (11:39)

      timeline.axis_nice_x boolean

      Clean X axis. Rounds out the X axis so that its start and end values are nice, round dates

      timeline.axis_nice_y boolean

      Clean Y axis. Rounds out the Y axis so that its start and end values are nice, round numbers

      timeline.scrubber_snap boolean

      Snap when scrubbing. When turned on, you can only jump to values that are supplied in the dataset and nothing in between

      timeline.scrubber_snap_paused boolean

      Snap when paused. Activate to snap the timeline to the closest interval when non animating. This is useful for ensuring the data visible in the visualization always reflects the data you have supplied.

      timeline.layout_settings boolean

      Layout settings.

      timeline.margin.top number

      Top.

      timeline.margin.left number

      Left.

      timeline.margin.bottom number

      Bottom.

      timeline.margin.right number

      Right.

      timeline.playback_button.margin_right number

      Space between button and timeline.

      timeline.scrubber_height number

      Scrubber height.

      timeline.playback_button.margin_right_button number

      Space between button and text.

      timeline.graph_settings boolean

      Chart settings.

      timeline.color_background color

      Background.

      timeline.graph_height number

      Height.

      timeline.curve boolean

      Curved lines.

      timeline.playback_styling boolean

      Play button settings.

      timeline.playback_button.button_color color

      Button color.

      timeline.playback_button.button_size number

      Button size.

      Max: 8

      timeline.playback_button.icon_color color

      Icon color.

      timeline.playback_button.icon_size number

      Icon size.

      Max: 8

      timeline.playback_button.label_size number

      Label size.

      Max: 8

      Controls & filters

      controls_container.alignment string

      Alignment.

      Allowed values:

      • start (fa-align-left)
      • center (fa-align-center)
      • end (fa-align-right)

      controls_container.controls_spacing number

      Spacing. The space between controls, like dropdowns and adjacent button sets, in em units.

      Max: 5

      filter_control.control_type string

      Control type. Choose between a dropdown, buttons or a time slider.

      Allowed values:

      • dropdown (data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAC0AAAAKCAYAAAFXtOeCAAAABGdBTUEAALGPC/xhBQAAADhlWElmTU0AKgAAAAgAAYdpAAQAAAABAAAAGgAAAAAAAqACAAQAAAABAAAALaADAAQAAAABAAAACgAAAAAWgdR+AAAAtklEQVQ4EdVV3QnEIAw25TbSB2foNI7iMu0MbuUR4ZOQy4OFCL2AmN8vMQallNLVez+DosNSsg/FGLtyDkR0H1rJMqOMiJxz4KWp1jpUsLNsptCBkD/MlFIgzx3IsD9GflTGTLvImN1ajP1x043dVrlr1fIY4xZZYd2kdATfWgu8NCEedtdWcJ+R1BVYnmIbsEzizW8bDO9CJd4cOijxCEH22DGIq1iyBiv2P8eDP4jVDrzE7/oCOyRFCckULykAAAAASUVORK5CYII=)
      • buttons (data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAACsAAAAKCAYAAAFaqpfFAAAABGdBTUEAALGPC/xhBQAAADhlWElmTU0AKgAAAAgAAYdpAAQAAAABAAAAGgAAAAAAAqACAAQAAAABAAAAK6ADAAQAAAABAAAACgAAAACxtWN2AAAA5klEQVQ4EdVUwQ2DMAwkqBuFBzO0y2QUlqEz5AEzpTrUiyzLEEPbRy2F2D7n4tgWYRiGuZRy75T0lhMxIcZYoKzrWvUeDi0VTSlt2DRN9dQ4jh0WBP4avHneH3kF/SGE5w0GWXPOHRaFfrDiEW5mEJjBZJY7UoPNakjM0s0KWYFnfa6MUbRlWR573daXurLlhHDXJNreugan7D2D0K09YUeJy467no+D1iyRUO+u5+tDLdudaYuIOEcQtncMeba1/6QCrUuv4nWwJIE1ZBKHLgdJY0f2J9z/NQb4cRxV4iQ2y/hvc78ACNVvxtjAMtcAAAAASUVORK5CYII=)

      filter_control.control_styles boolean

      Adv..

      filter_control.control_title string

      Control title.

      filter_control.button_group boolean

      Grouped.

      Allowed values:

      • true (On)
      • false (Off)

      filter_control.button_group_width_mode string

      Button group width.

      Allowed values:

      • auto (Auto)
      • full (Full)
      • fixed (Fixed)

      filter_control.button_group_width_fixed number

      Width.

      Max: 100

      filter_control.dropdown_width_mode string

      Dropdown width.

      Allowed values:

      • auto (Auto)
      • full (Full)
      • fixed (Fixed)

      filter_control.dropdown_width_fixed number

      Width.

      Max: 100

      filter_control.slider_width number

      Slider width. Width of the slider track in rems

      Max: 100

      filter_control.slider_max_label_width number

      Max label width. In rems, multiples of base font size. If larger than the longest label, only the space required to fit labels will be used.

      Max: 100

      filter_control.slider_step_time number

      Time between steps. Measured in seconds, positive values move the slider left to right, negative values move the slider right to left.

      Min: -100

      Max: 100

      filter_control.slider_loop boolean

      Loop.

      filter_control.slider_restart_pause number

      Pause before loop. Measured in seconds and in addition to the regular step time displayed above

      Max: 100

      filter_control.sort boolean

      Sorting.

      Allowed values:

      • true (On)
      • false (Off)

      controls_style.font_size number

      Text size.

      Max: 5

      controls_style.font_weight string

      Text weight.

      Allowed values:

      • bold (Bold)
      • normal (Normal)

      controls_style.height number

      Height.

      Max: 5

      Background.

      Text color.

      Dropdown border styles.

      Border style. Show border on all sides, or only at the bottom

      Allowed values:

      • all (All sides)
      • bottom (Bottom)

      Border width.

      Max: 20

      Color.

      Transparency.

      Max: 1

      Radius.

      Max: 100

      button_style.background color

      Background.

      button_style.background_selected color

      Selected.

      button_style.background_hover color

      Mouse over.

      button_style.font_color color

      Text color.

      button_style.font_color_selected color

      Selected.

      button_style.font_color_hover color

      Mouse over.

      button_style.button_styles_advanced boolean

      Button border styles.

      button_style.border_width number

      Border width.

      Max: 20

      button_style.border_color color

      Color.

      button_style.border_transparency number

      Transparency.

      Max: 1

      button_style.border_radius number

      Radius.

      Max: 100

      Popups

      Allowed values:

      • none (None)
      • popup (Popup)
      • panel (Panel)
      • both (Both)

      Popup content.

      Allowed values:

      • false (Auto)
      • true (Custom)

      Show popup styles.

      Popup custom header. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for popup use.

      Advanced users can add HTML styling or add category colors to popup headers.

      To hide parts of the popup when a column is empty using

      {{#if column_name}}Content for non-empty column_name{{/if}}.
      For example:
      {{#if Capital name}}Capital:{{/if}} {{Capital name}}.
      Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.

      Popup custom main content. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for popup use.

      Advanced users can add HTML for designs, styles, and images.

      To hide parts of the popup when a column is empty use the syntax

      {{#if column_name}}Content for non-empty column_name{{/if}}.
      For example:
      {{#if Capital name}}Capital:{{/if}} {{Capital name}}.
      Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.

      Popup custom accessible content. A text alternative to visual custom popup content that will be read out by screenreaders. This content is added as an aria-label attribute to data point elements. You can still use {{column_name}} to add values from your data, but do not use HTML. For example: {Name}}, Population: {{Population}}, GDP: {{GDP}} If left empty, accessible content will fallback to the default popup content.

      Max width. In rems, multiples of base font size. Leave blank to let the width adjust based on the contents.

      Text size.

      Text color.

      Align.

      Allowed values:

      • start (fa-align-left)
      • center (fa-align-center)
      • end (fa-align-right)

      Fill color.

      Fill opacity.

      Max: 1

      Padding.

      Radius. Corner radius of popup

      Header style.

      Allowed values:

      • block (Header block)
      • inline (Header inline)

      Background.

      Text.

      List type.

      Allowed values:

      • table (fa-table)
      • ul (fa-list)

      Label weight.

      Allowed values:

      • normal (Normal)
      • bold (Bold)

      List separator.

      Predefined values:

      • : (:)
      • (–)
      • (Empty space)
      • <br /> (Line break)

      Shadow.

      Pointer.

      Allowed values:

      • overlay (Overlay)
      • left (Left)
      • right (Right)
      • top (Top)
      • bottom (Bottom)

      Open duration.

      Max: 2000

      Always show.

      Placeholder content.

      Panel content.

      Allowed values:

      • false (Auto)
      • true (Custom)

      Show panel styles.

      Panel custom header. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for panel use.

      Advanced users can add HTML for styling or add category colors to panel headers.

      To hide parts of the panel when a column is empty using

      {{#if column_name}}Content for non-empty column_name{{/if}}.
      For example:
      {{#if Capital name}}Capital:{{/if}} {{Capital name}}.
      Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.

      Panel custom main content. Use {{column_name}} to add a value from your data. Ensure the column is selected, or add it to Info for popups for panel use.

      Advanced users can add HTML for designs, styles, images, videos and embedded Flourish charts,

      To hide parts of the panel when a column is empty using

      {{#if column_name}}Content for non-empty column_name{{/if}}.
      For example:
      {{#if Capital name}}Capital:{{/if}} {{Capital name}}.
      Here, the word "Capital:" will only show if the corresponding cell in the "Capital name" column is not empty.

      Width (%).

      Height (%).

      Width (%).

      Height (%).

      Max width (px).

      Max height (px).

      Vertical position. Choosing Click position is especially useful when your visualization is really tall, this will make sure the panel content is always on top of the element you've clicked on

      Allowed values:

      • click (Click position)
      • center (Center)

      Text color.

      Text size.

      Alignment.

      Allowed values:

      • start (fa-align-left)
      • center (fa-align-center)
      • end (fa-align-right)

      Fill color.

      Fill opacity.

      Max: 1

      Padding.

      Radius. Corner radius of panel

      List type.

      Allowed values:

      • table (fa-table)
      • ul (fa-list)

      Label weight.

      Allowed values:

      • normal (Normal)
      • bold (Bold)

      List separator.

      Predefined values:

      • : (:)
      • (–)
      • (Empty space)
      • <br /> (Line break)

      Shadow.

      Legend

      legend_categorical.show_legend boolean

      Allowed values:

      • true (Enabled)
      • false (Disabled)

      legend_categorical.title_mode string

      Title mode.

      Allowed values:

      • auto (Auto)
      • custom (Custom)

      legend_categorical.title string

      Title.

      legend_categorical.swatch_width number

      Width.

      legend_categorical.swatch_height number

      Height.

      legend_categorical.swatch_radius number

      Roundness. The radius of the corners of the swatch (in pixels)

      legend_categorical.legend_items_padding number

      Padding. Padding between legend items (in rems)

      legend_categorical.swatch_outline boolean

      Outline. An optional outline for the swatch in the legend

      legend_categorical.swatch_outline_color color

      Color.

      legend_categorical.order_override text

      Custom order override. Manually specify the order of legend entries (one entry per line)

      legend_categorical.icon_height number

      Height. Height of icon (in rems)

      legend_categorical.icon_color color

      Color. Fallback color (icon color if not determined by template)

      legend_categorical.max_width number

      Max width.

      legend_categorical.orientation string

      Orientation.

      Allowed values:

      • horizontal (Horizontal)
      • vertical (Vertical)

      legend_continuous.show_legend boolean

      Allowed values:

      • true (Enabled)
      • false (Disabled)

      legend_continuous.title_mode string

      Title mode.

      Allowed values:

      • auto (Auto)
      • custom (Custom)

      legend_continuous.title string

      Title.

      legend_continuous.color_band_width number

      Width.

      legend_continuous.color_band_height number

      Height.

      legend_continuous.color_band_radius number

      Roundness. The radius of the corners of the color band (in pixels)

      legend_continuous.binned_label_mode string

      Binned label mode.

      Allowed values:

      • thresholds (Thresholds)
      • centers (Centers)
      • custom (Custom)

      legend_continuous.binned_label_custom string

      Custom bin labels. List numeric values, separated by semi-colons.

      legend_continuous.legend_min number

      Legend min.

      legend_continuous.additional_min_label string

      Custom min label.

      legend_continuous.legend_max number

      Legend max.

      legend_continuous.additional_max_label string

      Custom max label.

      legend_container.alignment string

      Alignment.

      Allowed values:

      • start (fa-align-left)
      • center (fa-align-center)
      • end (fa-align-right)

      legend_container.orientation string

      Orientation.

      Allowed values:

      • horizontal (Horizontal)
      • vertical (Vertical)

      legend_container.title_weight string

      Title weight.

      Allowed values:

      • bold (Bold)
      • normal (Normal)

      legend_container.text_weight string

      Text weight.

      Allowed values:

      • bold (Bold)
      • normal (Normal)

      legend_container.text_color color

      Color.

      legend_container.text_size number

      Size.

      Max: 10

      Layout

      layout.body_font font

      Main font. This font will apply to the whole graphic by default. You can optionally change the font for the title, subtitle, footer, etc in the Header and Footer settings panels.

      layout.font_color color

      Text color. This color will apply to the whole graphic by default, You can optionally change the color for individual text elements, in other settings panels.

      layout.background_color_enabled boolean

      Color.

      Allowed values:

      • true (On)
      • false (Off)

      layout.background_image_enabled boolean

      Image.

      Allowed values:

      • true (On)
      • false (Off)

      layout.background_color color

      Background color.

      layout.background_image_src url

      Image URL.

      layout.background_image_size string

      Size.

      Allowed values:

      • cover (Fill)
      • contain (Fit)
      • auto (Original)
      • 100% 100% (Stretch)

      layout.background_image_position string

      Position.

      Allowed values:

      • top left (Top left)
      • top center (Top center)
      • top right (Top right)
      • center left (Center left)
      • center center (Center)
      • center right (Center right)
      • bottom left (Bottom left)
      • bottom center (Bottom center)
      • bottom right (Bottom right)

      layout.max_width_target string

      Maximum width. Apply a maximum width to just the main graphic or everything (main graphic plus header, footer, etc).

      Allowed values:

      • none (None)
      • wrapper (Everything)
      • primary (Main graphic)

      layout.max_width number

      Maximum width. Leave blank to stretch to container width

      Min: 50

      layout.max_width_align string

      Align.

      Allowed values:

      • left (fa-align-left)
      • center (fa-align-center)
      • right (fa-align-right)

      layout.layout_order string

      Layout order.

      Allowed values:

      • stack-default (Header – controls – legend – primary graphic – footer)
      • stack-2 (Primary graphic – header – controls – legend – footer)
      • stack-3 (Header – primary graphic – controls – legend – footer)
      • stack-4 (Controls – primary graphic – header – controls – legend – footer)
      • grid-1 (Grid mode: Primary graphic on the right)

      layout.space_between_sections string

      Space between sections.

      Allowed values:

      • 0.5 (▁)
      • 1 (▃)
      • 1.5 (▄)
      • custom (...)

      layout.space_between_sections_custom number

      Custom.

      Max: 100

      layout.margin_top number

      Top.

      layout.margin_right number

      Right.

      layout.margin_bottom number

      Bottom.

      layout.margin_left number

      Left.

      layout.border.enabled boolean

      Show borders around visualisation.

      layout.border.top.width number

      Top.

      layout.border.top.style string

      Style.

      Allowed values:

      • solid (Solid)
      • dashed (Dashed)
      • dotted (Dotted)

      layout.border.top.color color

      Color.

      layout.border.right.width number

      Right.

      layout.border.right.style string

      Style.

      Allowed values:

      • solid (Solid)
      • dashed (Dashed)
      • dotted (Dotted)

      layout.border.right.color color

      Color.

      layout.border.bottom.width number

      Bottom.

      layout.border.bottom.style string

      Style.

      Allowed values:

      • solid (Solid)
      • dashed (Dashed)
      • dotted (Dotted)

      layout.border.bottom.color color

      Color.

      layout.border.left.width number

      Left.

      layout.border.left.style string

      Style.

      Allowed values:

      • solid (Solid)
      • dashed (Dashed)
      • dotted (Dotted)

      layout.border.left.color color

      Color.

      layout.read_direction string

      Read direction. This will change the reading direction of the main text elements on the page. It's not possible to adjust this on all elements, such as axes.

      Note that when direction is set to right to left any alignment icons will be reversed.

      Allowed values:

      • ltr (Left to right)
      • rtl (Right to left)

      layout.font_size_mobile_small number

      layout.font_size_mobile_big number

      layout.font_size_tablet number

      layout.font_size_desktop number

      layout.font_size_big_screen number

      layout.breakpoint_mobile_small number

      layout.breakpoint_mobile_big number

      layout.breakpoint_tablet number

      layout.breakpoint_desktop number

      layout.breakpoint_big_screen number

      layout.header_align string

      Alignment.

      Allowed values:

      • left (fa-align-left)
      • center (fa-align-center)
      • right (fa-align-right)

      layout.title html

      layout.title_styling boolean

      Styling.

      layout.title_font font

      Title Font.

      layout.title_size string

      Size.

      Allowed values:

      • 1.4 (ᴀ)
      • 1.6 (A)
      • 2 (fa-font)
      • custom (...)

      layout.title_size_custom number

      Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3

      layout.title_weight string

      Weight.

      Allowed values:

      • bold (Bold)
      • normal (Regular)

      layout.title_color color

      Color.

      layout.title_line_height number

      Line height.

      Max: 3

      layout.title_space_above string

      Space above.

      Allowed values:

      • 0 (▁)
      • 0.5 (▃)
      • 1 (▄)
      • custom (...)

      layout.title_space_above_custom number

      Custom.

      Max: 100

      layout.subtitle html

      layout.subtitle_styling boolean

      Styling.

      layout.subtitle_font font

      Subtitle Font.

      layout.subtitle_size string

      Size.

      Allowed values:

      • 1.4 (ᴀ)
      • 1.6 (A)
      • 2 (fa-font)
      • custom (...)

      layout.subtitle_size_custom number

      Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3

      layout.subtitle_weight string

      Weight.

      Allowed values:

      • bold (Bold)
      • normal (Regular)

      layout.subtitle_color color

      Color.

      layout.subtitle_line_height number

      Line height.

      Max: 3

      layout.subtitle_space_above string

      Space above.

      Allowed values:

      • 0 (▁)
      • 0.5 (▃)
      • 1 (▄)
      • custom (...)

      layout.subtitle_space_above_custom number

      Custom.

      Max: 100

      layout.header_text html

      layout.header_text_styling boolean

      Styling.

      layout.header_text_size string

      Size.

      Allowed values:

      • 1.2 (ᴀ)
      • 1.4 (A)
      • 1.6 (fa-font)
      • custom (...)

      layout.header_text_size_custom number

      Custom. Specify a custom responsive font size in rems. The best results will be with values between 1.2 and 3

      layout.header_text_weight string

      Weight.

      Allowed values:

      • bold (Bold)
      • normal (Regular)

      layout.header_text_color color

      Color.

      layout.header_text_line_height number

      Line height.

      Max: 3

      layout.header_text_space_above string

      Space above.

      Allowed values:

      • 0 (▁)
      • 0.5 (▃)
      • 1 (▄)
      • custom (...)

      layout.header_text_space_above_custom number

      Custom.

      Max: 100

      layout.header_border string

      Allowed values:

      • top (Top)
      • bottom (Bottom)
      • top_and_bottom (Top & bottom)
      • none (None)

      layout.header_border_width number

      Width.

      layout.header_border_color color

      Color.

      layout.header_border_style string

      Style.

      Allowed values:

      • solid (Solid)
      • dashed (Dashed)
      • dotted (Dotted)

      layout.header_border_space number

      Space. Space between border and header text

      layout.header_logo_enabled boolean

      Allowed values:

      • true (Enabled)
      • false (Disabled)

      layout.header_logo_src url

      Image.

      layout.header_logo_alt string

      Alt text.

      Link.

      layout.header_logo_height number

      Height.

      layout.header_logo_align string

      Align. Align logo inside either the header or the main visualization container

      Allowed values:

      • inside (Header)
      • outside (Main container)

      layout.header_logo_position_inside string

      Position.

      Allowed values:

      • top (Top)
      • left (Left)
      • right (Right)

      layout.header_logo_position_outside string

      Position.

      Allowed values:

      • left (Left)
      • right (Right)

      layout.header_logo_margin_top number

      Top.

      layout.header_logo_margin_right number

      Right.

      layout.header_logo_margin_bottom number

      Bottom.

      layout.header_logo_margin_left number

      Left.

      layout.footer_align string

      Alignment.

      Allowed values:

      • left (fa-align-left)
      • center (fa-align-center)
      • right (fa-align-right)
      • justify (fa-align-justify)

      layout.footer_text_size number

      Size.

      layout.footer_text_color color

      Color.

      layout.footer_styling boolean

      Advanced footer styles.

      layout.footer_font font

      Font.

      layout.footer_text_weight string

      Weight.

      Allowed values:

      • bold (Bold)
      • normal (Regular)

      layout.source_name string

      Source name.

      layout.source_url string

      Source url.

      layout.multiple_sources boolean

      Multiple sources.

      layout.source_name_2 string

      Source name.

      layout.source_url_2 string

      Source url.

      layout.source_name_3 string

      Source name.

      layout.source_url_3 string

      Source url.

      layout.source_label string

      Source label.

      layout.footer_note html

      Note.

      layout.footer_note_secondary html

      Note (secondary). The secondary note is placed below the source and primary note

      layout.footer_logo_enabled boolean

      Image.

      Allowed values:

      • true (Enabled)
      • false (Disabled)

      layout.footer_logo_src url

      Image.

      layout.footer_logo_src_light hidden

      Image (light version). If provided this version will be used whenever the background color is dark

      layout.footer_logo_alt string

      Alt text.

      Link.

      layout.footer_logo_height number

      Height.

      layout.footer_logo_margin number

      Margin.

      layout.footer_logo_order string

      Position.

      Allowed values:

      • left (Left)
      • right (Right)

      layout.footer_align_vertical string

      V. align.

      Allowed values:

      • flex-start (Top)
      • center (Center)
      • flex-end (Bottom)

      layout.footer_border string

      Allowed values:

      • top (Top)
      • bottom (Bottom)
      • top_and_bottom (Top & bottom)
      • none (None)

      layout.footer_border_width number

      Width.

      layout.footer_border_color color

      Color.

      layout.footer_border_style string

      Style.

      Allowed values:

      • solid (Solid)
      • dashed (Dashed)
      • dotted (Dotted)

      layout.footer_border_space number

      Space. Space between border and footer text

      Accessibility

      layout.screenreader_text_primary text

      Screenreader description. A text alternative to the visual content that will only be visible to screenreaders, e.g. “The line chart shows China consistently higher than the other countries since 1990”.

      Do not replicate your title, since that will also be read by screenreaders.

      layout.screenreader_label string

      Screenreader label. A short text label given to the main Flourish embed wrapper to provide an accessible name that is only visible to screenreaders. Added in the form of an "aria-label".

      layout.screenreader_hide_primary boolean

      Screenreader mode for main visual container. Whether the main visual container is visible to screenreaders. (Text in the header and footer are always available to screenreaders.)

      Allowed values:

      • true (Hidden)
      • false (Readable)